Dr. Anthony N. Palazotto, Distinguished Professor Emeritus of Aerospace Engineering

Bio Photo

 

Contact:
Comm: (937) 255-3636 x4599
DSN: 785-3636 x4599
Click to E-mail
View Department

Publications

Archival Publications

1. Palazotto, A., and Morris, N., “An Elastic-Plastic Stress Solution using the Incremental Theory,” International Journal of Mechanical Sciences., pp. 97-106, 1971


2. Palazotto, A., and Kruger, J., “An Investigation of Springback in Wire Products,” Journal of Engineering for Industry, A.S.M.E., Feb. 1972, pp. 329-335. Also presented at the Symposium on the Fabrication of Advanced Matl, April 5-7, 1971.

3. Palazotto< A., and Seccombe, D., “Springbuck of Wire Products Considering Natural Strain,” presented to the Products Div., A.S.M.E., at New York Winter Convention, 1/72, published in Journal for Industry, August, 1973. Paper #72-WA/Prod-10 - pp. 809-814.

4. “An Elastic-Plastic Buckling Solution Using the Incremental Theory,” International Journal of Mechanical Science, pp. 279-290., April 1973.
5. Committee Report - “State of the Art Report on Fiber Reinforced Concrete,” Journal of the American Concrete Institute, , pp. 729-744, November, 1973.


6. Palazotto, A., and Hartnett, M., “Permanent Deformation of Bearing Raceway,” Transaction of American Society of Lubrication Engineers, Vol. 19, pp. 115-124,April, 1976.

7. Durocher, L, and Palazotto, A., “A Singularity Approach to Circular Plates,”presented at the Design Engineering Conference, ASME, April 5-8, 1976, Chicago, Illinois. Paper #76 - DE-28, also published in the Transaction ASME, Journal of Engineering for Industry, pp. 1176-1178, November, 19766.


8. “Bifurcation and Collapse Analysis of Stringer and Ring-Stringer Stiffened Cylindrical Shells with Cutouts,” presented at the Second National Symposium on Computerized Structural Analysis and Design, George Washington University, Washington, DC: March 29-31, 1976. Published in the Int. Journal of Computers and Structures, Vol. 7, pp. 47-58, 1977.

9. Palazotto, A., and Hartnett, M., “Dynamic Life Estimation for Track Surfaces Under Periodic Loadings and Non-Uniform Backup Supports,” Transaction of the ASME, Journal of Lubrication Technology, pp. 602-606. October, 1976, also presented at the ASME Lubrication Symposium, May 24-26, 1976 at Atlanta, Georgia, paper #76-Lubs 12.

10. Uthenwoldt, G., and Palazotto, A., “An Approximate Plane Stress Solution Using Modified Prandtl-Reuss Equations,” Mechanics in Engineering, Proceeding of First ASCE - EMD Specialty Conference, Solid Mechanics Study No. 11, University of Waterloo, Canada, pp. 271-289, 1977.

11. Palazotto, A., Witt, W., and Hahn, H., “Numerical and Experimental Comparison of the Notch Tip Stresses in a Laminated Graphite/Epoxy Plate,” presented and published by the Structures, Structural Dynamics and Materials Conference. AIAA/ASME, April 3-5, 1978, Bethesda, Maryland, pp. 262-269, published in AIAA Journal, Vol. 17, No. 5, pp. 500-506, May, 1979.

12. Palazotto, A.,and Cervantes, J.,“Cutout Reinforcement of Stiffened Cylindrical Shells,” presented and published by the Structures, Structural Dynamics and Material Conference, AIAA/ASME, April 3-5, 1978, Bethesda, Maryland, pp. 331-339, published in the AIAA Journal of Aircraft, Vol. 16, No. 3, pp. 203-208,March,1979.

13. Hannah, S.,and Palazotto, A.,“The Incorporation of Truncated Fourier Series into Finite Difference Approximations of Structural Stability Equations,” presented and published by the Symposium on Future Trends In Computerized Structural Analysis and Synthesis, October 30- November 1, 1978, Washington, DC, published in the 1979, Int. Journal of Computers and Structures, Vol. 9, pp. 603-607.

14. Palazotto, A., and Schneider, D., “A Technique for Evaluating a Unique Set of Three Weibull Parameters Considering Composite Materials,” published in the Journal of Fiber Science and Technology, Vol. 12, No. 4, pp. 269-281, July, 1979.

15. Rolle, K. Crisp, J., and Palazotto, A., “Design and Analysis of a High-Pressure Apparatus,” presented at the ASME Design Engineering Conference, Chicago, Ill., May 9, 1979, published in the Journal of Mechanical Design, ASME, July, 1980,pp. 633-640.

16. Palazotto, A.,and Nelson, D.,“A Parametric Study Relating to the Buckling of Axially Compressed Stringer Stiffened Cylindrical Shells with Cutouts,” accepted for presentation and publication at the AIAA 20th Structures, Structural Dynamics and Materials Conference, St. Louis, Missouri, April 4-6, 1979, published in the Journal of Aircraft, AIAA, Vol. 17, No. 4, pp. 272-274.

17. Hinnerichs, T., and Palazotto, A., “Visco-plasticity and Creep of a Three Bar Linkage,” presented and published at the Third ASCE/EMD Specialty Conference, Sept 17-19, University of Texas, Austin, Texas, pp. 645-648, published in the Journal of the Engineering Mechanics Division. Proceedings of the ASCE, June,1980, pp. 567-571.

18. Palazotto, A., and Harper, J., “Buckling Analysis of Laminated Composite Cylindrical Shells,” presented and published at the Third International Conference on Vehicle Structural Mechanics, October 10-12, 1979, Troy, MI, pp. 91-104,SAE/P - 79/83. Also published in the Transactions of Soc. Auto. Engineers. pp.3275-3288.

19. Durocher, L, Palazotto, A., and Ciardullo, S, S., “Indeterminate Supported Deep Beams with Cutouts”, published in the Journal of Computer and Structures, Vol. 13,pp. 537-546, April 1981.

20. Witt, W., and Palazotto, A., “Nonlinear Analysis of Laminated Composite Plates,” presented at the International Symposium on Mechanical Behavior of Structural Media, May 19-21, 1981, Carleton University, Ottawa, Canada. Published in Mechanics of Structured Media, Elsevier Scientific Publishing Co., pp. 401-407, May, 1981.

21. Palazotto, A., and Becker, M., “Experimental Investigation of the Instability of Composite Cylindrical Panels,” presented at the 1981 SESA Spring Conference, Dearborn, MI., May 31-June 5 1981, Published in the Journal of Experimental Mechanics, Vol.22, No.10, October, 1982, pp. 372-376.

22. Hinnerichs,T.,Nicholas, T., and Palazotto, A.,“Application of a Numerical Procedure to Creep Crack Growth from Displacement Measurements in IN-100,” presented at the 14th National Symposium on Fracture Mechanics, ASTM, UCLA, Los Angeles, CA, June 29-July 1, 1981, ASTM STP 791, pp. II-166-181, 1983.

23. Hinnerichs, T., Palazotto, A., and Nicholas, T., “A Hybrid Experimental-Numerical Procedure for Determining Creep Crack Growth Rates,” published in the Journal of Engineering Fracture Mechanics, Vol. 16, No. 2, pp. 265-277, 1982.

24. Palazotto, A., Becker, M, and Khot, M., “Buckling of Composite Panels,” presented at the 21st, Structural Dynamics and Material Conference, AIAA, Seattle, Washington, May 12-14, 1980. Published in Journal of Aircraft, AIAA, Vol., 18, No. 9, pp.739-743, Sept, 1981.

25. Palazotto, A., Grandt, A., and Bartikva, D., “An Experimental Weight Function Method for Stress Intensity Factor Calibration,” presented at the Fourth International Congress on Experimental Mechanics, Boston, MA, May, 1980, Published in the Journal of Experimental Mechanics, Vol. 21, No. 10, Oct. 1981, pp. 371-378. (This paper was judged the best research paper in Exp. Mech. for 1981 and the co-authors received the Hetenyi Award).

26. Gallo, R, and Palazotto, A., “Approximate Design Analysis of Failure within Composite Laminated Plates,” presented at the Eastern Design Engineering Conference, ASME, Oct 26-28, 1980, published in ASME Transaction, Journal of Mechanical Design, Vol. 104, pp. 604-611, July, 1982.

27. Palazotto, A., Villhart, V.and Bang, C., “Instability of Short Stiffened and Composite Cylindrical Shells Acting under Pure Bending Moments,” presented at the 22nd Structures, Structural Dynamics, and Material Conference, AIAA, April 6-8, 1981, Atlanta, Georgia, paper #81-0571. Published in the Journal of Computersand Structures, Vol. 16, No. 6, pp. 773-775, 1983.

28. Hinnerichs, T.,Palazotto, A., and Nicholas, T., “Evaluation of Creep Crack Growth Criteria in IN-100 at Elevated Temperature,” presented at the 22nd, Structures, Structural Dynamics, and Material Conference, AIAA, April 6-8, 1981, Atlanta, Georgia, Paper #81-0540/ Published in the Journal of AIAA, Vol. 21, No. 3,pp.438-445, March, 1983.

29. Henricksen, Palazotto, A., and Nestle, A., “The Role of Monotonous Compression on Intervertebral Joint Mechanics and its Analytical Validation,” presented at the Aerospace Medical Association, 52nd Annual Scientific Meeting, San Antonio, TX, May 21, 1981 and the Journal of Aviation Space and Environmental Medicine.

30. Allen, L., and Palazotto,A.,“A Finite Element Analysis of the Viscoelastic Interaction Between The Nucleus Pulposus and Annulus Fibrosis within the Human Intervertebral Joint,” presented at the First Southern Biomedical Engineering Conference, Louisiana State University Medical Center, June 7-8, 1982, published in Biomedical Engineering, Recent Developments, Editor, S. Saha, Pergamon Press, 1982, pp. 75-80.

31. Becker, M., Palazotto, A., and Khot, N., “Experimental Investigation of Instability of Composite Cylindrical Panels,” Experimental Mechanics, Vol. 22, No. 10, pp. 372-376, October, 1982.

32. Palazotto, A., Boyd, H., Alberson, J., and Mindlin, H., “Structural Materials in Aerospace Applications,” published in the Transportation Engineering Journal of ASCE, Proceedings of American Society of Civil Engineering, Vol. 108, TES, pp. 484-494, September, 1982.

33. Snead, J., and Palazotto A., “Moisture and Temperature Effects on the Instability of Cylindrical Composite Panels,” published in the Journal of Aircraft, Vol. 20, No. 9,pp. 777-783, September 1983.

34. Furlong, D., and Palazotto, A., “A Finite Element Analysis of the Influence of Surgical Herniation on the Viscoelastic Properties of the Intervertebral Disc,” published in the Journal of Biomechanics, Vol. 16, No. 10, pp. 785-795, 1983.

35. Smail, J., and Palazotto, A., “The Visco-plastic Crack Growth Behavior of a Compact Tension Specimen Using the Bodner-Partom Flow Law,” published in the Journal of Engineering Fracture Mechanics, Vol. 19, No. 1, pp. 137-158, 1984.

36. Janisse, T., and Palazotto, A., “Collapse Analysis of Cylindrical Composite Panels with Cutouts,” published in the Journal of Aircraft, Vol. 21, No. 9, pp. 731-733,September 1984.

37. Mulholland, M., and Palazotto, A., “The Non-membrane Prebuckling Effects of Stiffened Cylindrical Panels,” published in the Journal of Computers and Structures, Vol. 18, No. 6, pp. 1115-1120, 1984.

38. Palazotto, A., and Bohun, M., “Comparison of Two Visco-plastic Flow Mechanics Laws as Applied to a Problem of Crack Growth,” published in the Journal of Engineering Fracture Mechanics, Vol. 21, No. 3, pp. 503-519, 1985.

39. Gans, H., and Palazotto, A.,” The Comparison between Three Different Elements within a Center Crack Plate Considering Elastic-Plastic Action,” published in the Journal of Computers and Structures, V901 21, No. 6, pp. 1335-1344, 1985.

40. Keck, H., Palazotto, A., and Nicholas, T., “High Temperature Visco-plastic Fatigue Behavior of a Compact Tension Specimen,” published in the Journal of Engineering Fracture Mechanics,” Vol. 22, No. 1, pp. 77-91, 1985.

41. Palazotto, A., and Lee, C.,” Collapse Analysis of Composite Cylindrical Panels with Small Cutouts,” AIAA Paper No. 84-0089, also published in the Journal of Composite Structures, Vol. 4, pp. 217-229, 1985.

42. Wilson, R., and Palazotto, A., “Visco-plasticity in a Superalloy at Elevated Temperatures Considering Tension and Compression Loading,” published in the Journal of Engineering Fracture Mechanics, Vol. 22, No. 6, pp. 927-937, 1985.

43. Witt, W., and Palazotto, A., “Formulation of a Nonlinear Compatible finite Element for the Analysis of Laminated Composites,” published in the Journal of Computers and Structures, Vol. 21, No. 6, pp. 1213-1234, 1985.

44. Valentine P., Palazotto, A., and Ruh, R., “Thermal Shock Resistance of SIC-BN Composites,” published in Advanced Ceramic Materials, Vol. I, No. I, pp. 81-87,1986; also, presented at the 86th Annual Meeting, The American Ceramic Society, Pittsburgh, PA, May 1, 1984.

45. Flanagan, G., and Palazotto, A., “Composite Laminate Optimization Program Suitable for Microcomputers,” published in the Journal of Computer and Structures,” Vol. 22, No. 6, pp. 995-1009, 1986.

46. Henkel, C., and Palazotto, A., “The Effects of low Cycle Fatigue Comparing Compact Tension and Center Cracked Specimens at Elevated Temperatures,” published in Journal of Engineering Fracture Mechanics, Vol. 24, No. 4, pp. 483-494, 1986.

47. Wilson, R., and Palazotto, A.,” Visco-plastic Fatigue in a Superalloy at Elevated Temperatures,” published in ASTM STP 905, pp. 265-275, 1986.

48. Hermsen, M., and Palazotto, A.,“The Effects of Cutout Location and Material Degradation on the Collapse of Composite Panels,” presented at the 1986 PressureVessels and Piping Conference ASME, Chicago, IL, July 24, 1986, published in theNonlinear Analysis and NDE of Composite Material Vessels and Components,PVP-Vol. 115, pp. 43-57.

49. Henricksen, R., and Palazotto, A., “Nonlinear Finite Element Analysis of Thick Composite Plates Using Cubic Spline Functions,” published in AIAA Journal, Vol. 24, No. 11, pp. 1836-1842, 1986.

50. Straw, A., and Palazotto, A., “Shear Buckling of Composite Cylindrical Panels Considering Material Degradation,” published in Journal Aircraft, AIAA, Vol. 23, No. 12, pp. 912-914, Dec 1986.

51. Siefert, G., and Palazotto, A.,” The Effect of a Centrally Located Midplane Delamination on the Instability of Composite Panels,” published in the Journal of Experimental Mechanics, Vol. 26, No. 4, pp. 330-336, Dec 1986.

52. Bai, S., Palazotto, A., and Keller, R., “Structure of High-Performance Fibers under Compressive Deformation,” published in Bulletin American Phys. Soc., Vol. 32, pp. 662, 1987.

53. Palazotto, A., and. Mercer, J., “Elastic-Plastic Nonlinearities Considering Fracture Mechanics,” published in Journal Computers and Structures, Vol. 25, No. 6, pp.919-935, 1987.

54. Tisler, T., and Palazotto, A., “Insight into the Collapse of Composite Cylindrical Panels with Cutouts: Analysis and Experimentation,” presented at the ASME, PVP Conference, July 3, 1987, Published in ASME, “Recent Advances in StructuralDynamics,” PVP-Vol. 124, pp. 55-1987.

55. Henricksen, R., Palazotto, A., and Witt, W., “Through the Thickness Considerations for Composite Plates with Large Displacements,” presented at theASME, PVP Conference, July 3, 1987, published in ASME, Recent Advances in Structural Dynamics, PVP - Vol. 124, pp. 47-53.

56. Horban, B., and Palazotto, A., “Experimental Buckling of Cylindrical Composite Panels with Eccentrically Located Circular Delaminations,” Published in AIAAJournal of Spacecraft and Rockets, Vol. 24, No. 4, pp. 349-352, 1987.

57. Straw, A., and Palazotto, A., “Shear Buckling of Cylindrical Composite Panels,” published in the Journal of Computers and Structures, Vol. 27, No. 5, pp. 689-692,1987.

58. Bowlus, J., Palazotto, A., and Whitney, J., “Vibration of Symmetrically Laminated Rectangular Plates Considering Shear Deformation and Rotatory Inertia,” publishedin AIAA Journal, Vol. 25, No. 11, pp. 1500-1511, November, 1987.

59. Ruh, R., Palazotto, A., and Watt, G.,” Introduction to Metal Matrix Composites in Aerospace Applications,” published in the Journal of Aerospace Engineering,ASCE, Vol. 1, No. 1, pp. 3-17, January, 1988.

60. Henricksen, R., and Palazotto, A., “Use of Cubic Spline Function in Finite Elements,” published in Mathematical and Computer Modeling, Vol. 10, No. 1, pp.37-47, 1988.

61. Palazotto, A., Ruh R., and Watt, G.,” Introduction to Ceramic Matrix Composites in Aerospace Applications II,” published in the Journal of Aerospace, ASCE, Vol. 1,No. 2, pp. 65-78, April, 1988.

62. Cron, S., and Palazotto, A., and Sandhu, A.,” The Improvement of End-Boundary Conditions for the Off-Axis Tension Specimen Use,” published in the Journal ofExperimental Mechanics, pp. 14-19, March, 1988.

63. Palazotto, A., Nicholas, T., and Bednarz, E., “An Analytical Investigation ofPlasticity Induced Closure Involving Short Cracks,” published in ASTM STP 982, pp. 361-379, 1988.

64. “An Experimental Study of Curved Composite Panels with a Cutout,” published in ASTM STP 972, pp. 191-202, 1988.

65. Palazotto, A., and Tisler, T., “Considerations of Cutouts in Composite Panels,” published in Journal of Computer and Structures, Vol. 29, No. 6, pp. 1101-111-,1988.

66. Keller, C., Palazotto, A., and Bai, S., “Compressive Deformation of Embedded high-performance Polymeric Fibers,” published in AIAA Journal, Vol. 27, No. 4, pp. 479-485, April, 1989.

67. Palazotto, A., Henricksen, R., and Witt, A.,” The-ply Rotational Compatibility for Composite Plates” published in Composite Structures, Vol. 11, No. 3, pp. 167-182,1989.

68. Tisler, T., and Palazotto, A., “Experimental Collapse Determination of Cylindrical Composite Panels with Large Cutouts under Axial Load”, Composite Structures,Vol. 12, pp. 91-98, 1989.

69. Shih, K., and Palazotto, A., “Formulation of Boundary Integral Equations for Linear Elastic Shells,” published in Computers and Mathematics Application, Vol. 18, No.12, pp. 995-999, 1989.

70. Palazotto, A., and Maddux, E., and Horban, A.,” The Use of Stereo X-ray and Deply Techniques for Evaluating Instability of Composite Cylindrical Panels withDelamination,” published in Journal of Experimental Mechanics, Vol. 29, No. 2, pp. 144-151.

71. Palazotto, A., and Bednarz, E., “A Finite Element Investigation of Visco-plastic Induced Closure of Short Cracks at High Temperatures,” Fracture Mechanics: Perspective and Directions (twentieth Symposium), ASTM STP 1020, R. P. Wei andR. P. Gangloff, Eds. American Society for Testing and Materials, Philadelphia, pp. 530-547, 1989.

72. Dennis, S., and Palazotto, A., “Transverse Shear Deformation in Orthotropic Cylindrical Pressure Vessels Using a Higher-Order Shear Theory,” AIAA Journal, Vol. 27, No. 10, October, 1989.

73. Palazotto, A., and Ramey, J., “A Study of Graphite/Peek under High Temperatures,” Advances in Thermoplastic Matrix Composite Materials, ASTM STP 1044, G. M.Newaz Ed., American Society for Testing and Materials, Philadelphia, pp. 91-112,1989.

74. Palazotto, A., and Mercer, J., “Finite Element Elastic - Plastic Analysis of Cracks,” published in Journal of Computer and Structures, Vol. 33, No. 2, pp. 363-373, 1989.

75. Palazotto, A., and Palardy, J.,” Buckling and Vibration of Composite Plates Using the Levy Method,” Composite Structures, Vol. 14, pp. 61-86, 1990.

76. Cron, S., Palazotto, A., and Sandhu, R., “A Failure Criterion Evaluation for Composite Materials,” Composite Materials: Testing and Design (Ninth Volume)ASTM STP 1059, S. P. Garbo, Ed. American Soc. For Testing and Materials, Philadelphia, pp. 494-507, 1990.

77. Dennis, S., and Palazotto, A., “Large Displacement and Rotational Formulation for Laminated Shells Including Parabolic Transverse Shear,” Int. Journal Non-Linear Mechanics, Vol. 25, No. 1, pp. 67-85, 1990.

78. Tsai, C., and Palazotto, A., “A Modified Riks Approach to Composite Shell Snapping Using a Higher Order Shear Deformation Theory”, Journal, Computer and Structures, Vol. 35, No. 3, pp. 221-226, 1990.

79. Palazotto, A., and Mercer, J., “A Finite Element Comparison Between Short and Long Cracks within a plastic Zone Due to a Notch”, Journal Engineering Fracture Mechanics, Vol. 35, No. 6, pp. 967-986, 1990.

80. Dennis, S., and Palazotto, A., “Static Response of a Cylindrical Composite Panel with Cutouts Using a Geometrical Nonlinear Theory”, AIAA Journal, Vol. 26, No. 6, pp.1082-1088, 1990.

81. Palazotto, A., and Mercer, J., “Crack Considerations in a Notched Compact Tension Specimen”, published in Journal Engineering Fracture Mechanics, Vol. 37, No. 3, pp.473-492, 1990.

82. Tsai, C., and Palazotto, A., “The Application of the Riks Technique to Shell Snapping”, Journal of Mathematical and Computational Modeling, Vol. 14, pp. 868-872, 1990.

83. Shih, K., and Palazotto, A., “On the Formulation of Boundary Equations for Orthotropic Cylindrical Shells”, Journal of Mathematical and Computational Modeling, Vol. 14, pp. 855-862, 1990.

84. Tsai, C., and Palazotto, A., “On the Finite Element Analysis of Non-Linear Vibration for Cylindrical Shells with High-Order Shear Deformation Theory”, International Journal of Nonlinear Mechanics, Vol. 26, No. 14, pp. 379-388, 1991.

85. Dennis, S., and Palazotto, A., “Laminated Shell on Cylindrical Bending twodimensional Approach Versus Exact,” AIAA Journal, Vol. 29, No. 4: pp. 647-650,April, 1991.

86. Tsai, C., Palazotto, A. and Dennis, S., “Large Rotation Snap Through Buckling in Laminated Cylindrical Panels,” Finite Elements in Analysis and Design, Vol. 9, pp.65-75, 1991.

87. Linneman, P., and Palazotto, A., “Vibration and Buckling Characteristics of Composite Cylindrical Panels Incorporating the Effects of a Higher Order Shear Theory,” International Journal of Solids and Structures, Vol. 28, No. 3, pp. 341-361, 1991.

88. Palazotto, A., and Daniels, J., “Failure Characteristics in Thermoplastic Composite Laminates Due to an Eccentric Circular Discontinuity,” AIAA Journal, Vol. 29, No.5, pp. 830-837, May 1991.

89. Raouf, R., and Palazotto, A., “Nonlinear Dynamic Response of Anistropic, Arbitrarily Laminated Shell Panels: An Asymptotic Analysis,” published in Composite Structures, Vol. 18, pp. 163-192, 1991.

90. Palazotto, A., and Wilder, B., “A Study of an Implanted Delamination within a Cylindrical Composite Panel,” Composite Materials: Fatigue and Fracture, ASTMSTP1110, T. K. O’Brien, Ed. American Society for Testing and Materials, Vol. 3, pp. 373-389, 1991.

91. Tsai, C., and Palazotto, A., “Nonlinear and Multiple Snapping Responses of Cylindrical Panels Comparing Displacement Control and Riks Methods,” Journal of Computers and Structures, Vol. 41, No. 4, pp. 605-610, 1991.

92. Fisher, M., Palazotto, A., and Sandhu, R., “A Study of Failure Characteristics in Thermoplastic Composite Materials at 250F,” Journal of Composite Technologyand Research, Vol. 13, No. 3, pp. 152-160, Fall 1991.

93. Raouf, R., and Palazotto, A., “Nonlinear Free Vibrations of Symmetrically Laminated, Slightly Compressible Cylindrical Shell Panels,” published inComposite Structures, Vol. 20, No. 4, pp. 249-257, 1992.

94. Faway, S., Palazotto, A., and Wang, C., “Axial Tensile and Compressive Properties of High-Performance Polymeric Fibers,” published in Polymer, Vol. 33, No. 1, pp.100-105, 1992.

95. Schimmels, S., and Palazotto, A., “Collapse Characteristics of Cylindrical Panels under Axial Loads,” published in AIAA Journal, Vol. 30, No. 5, pp. 1447-1449,May 1992.

96. Perry, R., and Palazotto, A., “Impact Response of Graphite/Epoxy Cylindrical Panels,” published in AIAA Journal, Vol. 30, No. 7, pp. 1827-1832, July 1992.

97. Chien, L, Palazotto, A., and Taylor, W., “Stability Characteristics of Laminated Cylindrical Panels under Transverse Loading,” published in AIAA Journal, Vol. 30,No. 6, pp. 1649-1653, June 1992.

98. Chien, L, and Palazotto, A., “Nonlinear Snapping Considerations for Laminated Cylindrical Panels, “published in Journal of Composite Engineering, Vol. 2, No. 8,pp. 631-639. 1992.

99. Chien, L., and Palazotto, A., “Dynamic Buckling of Composite Cylindrical Panels with Higher - Order Transverse Shear Subjected to a Transverse ConcentratedLoad”, Int J. Nonlinear Mechanics Vol. 27, No. 5, pp. 719-734, 1992.

100. Owens, M., Palazotto, A., and Dennis, S., “Transverse Shear Flexibility in Laminated Plates under Large Deflections,” J. Computer and Structures, Vol. 45, No. 1, pp. 69-78, 1992.

101. Dennis, S., and Palazotto, A., “Effect of Nonlinear Curvature Strains on Buckling
of Laminated Plates and Shells,” Intl. J. for Numerical Methods in Engineering,
Vol. 36, No. 4, pp. 595-610, 1993.
102. Palazotto, A., Levarea, V., and Maddux, E., “The Effect of Cutout Positioning on
the Dynamic Characteristics of a Curved Composite Panel,” Composite Structures,
Vol. 23, No. 23, pp. 263-272, 1993.
103. Hatfield, J., and Palazotto, A.,’Effect of Thickness and Ply Lay-up on the Collapse
Characteristics of Cylindrical Composite Shells,” AMD - Vol. 159, Mechanics of
Composite Materials: Nonlinear Effects, ASME 1993, pp. 153-162. Also, presented
at the First Joint Mechanics Meeting of ASME-ASCE-SES, Charlottesville VA,
June 6-9, 1993.
104. Smith, R., and Palazotto, A., “Comparison of Eight Variations of a Higher-Order
Theory for Cylindrical Shells,” AIAA Journal, Vol.31, No. 6, pp. 1125-1132, June
1993.
105. Fidan, S., Palazotto, A., and Tsai, C., “Compressive Properties of High-
Performance Polymeric Fibers,” Composite Science and Technology. Vol. 49, pp.
291-297, 1993.
106. Schimmels, S., and Palazotto, A., “Nonlinear Geometric and Material Behavior of
Shell Structures with Large Strains,” Journal of Engineering Mechanics, ASCE,
Vol. 20, No. 2, pp. 320-345, February 1994.
107. Tighe, K., and Palazotto, A., “High Order Cylindrical Panel Relationships
Considering General Ply Lay-ups,” Journal Composite Structures, Vol. 27, pp. 225-
242, 1994.
108. Martin, R., Palazotto, A., and Sandhu, R., “Experimental and Analytical
Comparisons of Failure in Thermoplastic Composite Laminates,” Journal of
Experimental Mechanics, Vol. 34, No.1, pp. 53-68, March 1994.
109. Creaghan, S., and Palazotto, A., “Nonlinear Large Displacement and Moderate
Rotational Characteristics of Composite Beams Incorporating Transverse Shear
Strain,” Computers and Structures, Vol. 51, No. 4, pp. 357-371, 1994.
110. Raouf, R., and Palazotto, A., “On the Non-Linear Free Vibrations of Curved
Orthotropic Panels,” Intl. Journal Nonlinear Mechanics, Vol. 29, No. 4, pp.507-514,
1994.
111. Dennis, S., and Palazotto, A., “Instability in a Cylindrical Panel Subjected to
Normal Pressure: Bifurcation vs., Nonlinear Analysis,” Composite Engineering,
Vol.4, No. 6, pp. 605-620, 1994.
112. Greer, J., and Palazotto, A., “Some Nonlinear Response Characteristics of Collapse
Composite Shells,” AIAA Journal, Vol. 32, No. 9, pp. 1935-1938, September 1994.
113. Forral, A, and Palazotto, A., “A Finite Element Model Considering Nonlinear
Dynamically Loaded Composite Plates and Shells,” Intl. Journal for Engineering
Analysis and Design, Vol. 1, No. 4, pp. 374-393, October, 1994.
114. “Contributing author to the text “Buckling and Post-Buckling of Composite Plates,
Edited by G.J. Turvey and I.H. Marshall, Chapter II, “Instability of Composite
Panels” pp. 366-389, published by Chapman and Hall, 1995.
115. Eldred, L., Baker, W., and Palazotto, A., “Kelvin-Voigt vs. Fractional Derivative
Model as Constitutive Relations for Viscoelastic Materials,” AIAA Journal, Vol.
33, No. 3, pp. 547-550, March 1995.
116. Pai, F., and Palazotto, A., “Polar Decomposition Theory in Nonlinear Analysis of
Solids and Structures,” ASCE Journal of Engineering Mechanic, Vol. 121, No. 4,
pp. 568-581, April 1995.
117. Birman, V., and Palazotto, A., “Environmental and Viscoelastic Effects of Stresses
in Adhesive Joints,” ASCE Journal of Aerospace Engineering, Vol. 8, No. 2, pp.
107-118, April 1995.
118. Greer, J., and Palazotto, A., “Nonlinear Dynamics of a Simple Shell Model with
Chaotic Behavior,” ASCE, Journal of Engineering Mechanics, Vol. 121, No. 6, pp.
753-761, June, 1995
119. Palazotto, A., and Miller, D., “Nonlinear Finite Element Analysis of Composite
Beams and Arches Using a Large Rotation Theory,” Finite Elements in Analysis
and Design, Vol. 19, pp. 131-152, 1995.
120. Birman, V., and Palazotto, A., “Review of Facture in Adhesive Joints Considering
Rocket Motor Application,” Journal of Spacecraft and Rockets, Vol. 32, No. 3, pp.
538-544, May-June, 1995.
121. Pai, F., and Palazotto, A., “Nonlinear Displacement Based Finite Element Analyses
of Composite Shells-A New Total Lagrangian Formulation,” Intl. Journal of Solid
and Structures, Vol. 32, No. 20, pp. 3047-3073, 1995.
122. Raouf, R., and Palazotto, A., “Nonlinear Dynamics of Unidirectional, Fiber-
Reinforced Tori,” ASCE, Journal of Engineering Mechanics Vol. 122, No. 3, pp.
271-276, March 1996.
123. Baker, W., Eldred, L. and Palazotto, A., “Viscoelastic Material Response with a
Fractional-Derivative Constitutive Model” AIAA Journal, Vol. 34, No. 3, pp 596-
600, March 1996.
124. Pai, F., and Palazotto, A., “Large Deformation Analysis of Flexible Beams,” Intl.
Journal of Solids and Structures, Vol. 33, No. 9, pp. 1335-1353, April 1996
125. Pai, F., and Palazotto, A., “Authors Closure For: Large Deformation Analysis of
Flexible Beams,” Intl. Journal of Solid and Structures, Vol. 33, No. 9, pp. 371-
1373, April 1996.
126. Chaplin, C., and Palazotto, A., “The Collapse of Composite Cylindrical Panels
with Various Thicknesses Using Finite Element Analysis”. Computers and
Structures, Vol. 60, No. 5, pp. 797-815, 1996.
127. Eldred, L., Baker, W., and Palazotto, A., “Numerical Application of Fractional
Derivative Model Constitutive Relations for Viscoelastic Materials.” Computers
and Structures, Vol. 60, No.6, pp. 875-882, 1996.
128. Greer, J., and Palazotto, A., “Nonlinear Finite Element Analysis of Isotropic and
Composite Shells by a Total Lagrangian Decomposition Scheme”, Mechanics of
Composite Mechanics and Structures, Vol. 3, pp. 241-271, 1996.
129. Raouf, R., and Palazotto, A., “Nonlinear Analysis of Pressurized Spinning Fiber-
Reinforced Tori”, AIAA Journal, Vol.34, No. 12, pp.2596-2603, 1996.
130. Herup, E., and Palazotto, A., “Elasticity Solutions for Hertzian Loaded Composite
Sandwich Plates”, Journal of Aerospace Engineering, ASCE, Vol. 10, No. 1, pp.27-
37, Jan. 1997.
131. Palazotto, A., and Wham, B., “An Investigation of Graphite Peek Composite under
Compression with a Centrally Located Circular Discontinuity”, Composite Structures,
Vol. 35, pp.375-386, 1996.
132. Greer, J., and Palazotto, A., “Nonlinear Dynamics of a Simple Shell Model with
Chaotic Snapping Behavior,” (closure) Journal of Engineering Mechanics, ASCE,
Vol.123, No.1, pp. 96, Jan., 1997.
133. Gummadi, N., and Palazotto, A., “Nonlinear Finite Element Analysis of Beams and
Arches Using Parallel Processors,” Computers and Structures, Vol. 63, No. 3, pp. 413-
428, 1997.
134. Gummadi, N., and Palazotto, A., “Nonlinear Analysis of Beams and Arches
Undergoing Large Rotations,” Journal of Engineering Mechanics, ASCE, Vol. 123,
No. 4, pp. 394-398, April, 1997.
135. Gummadi, N., and Palazotto, A., “Finite Element Analysis of Arches Undergoing
Large Rotations - I: Theoretical Comparisons,” Finite Elements in Analysis and
Design, Vol. 24, pp. 213-235, 1997.
136. Gummadi, N., Palazotto, A., and Bailey, J., “Finite Element Analysis of Arches
Undergoing Large Rotations - II: Classification,” Finite Elements in Analysis and
Design, Vol. 24, pp. 237-252, 1997.
137. Greer, J., and Palazotto, A., “Singularities in Polynomial Representations of
Transverse Shear in Finite Elements,” AIAA Journal, Vol. 35, No. 7, pp. 1248-1250,
July, 1997.
138. Palazotto, A. and Vaidya U, and Gummadi, N., “Low Velocity Impact Response and
Non-destructive Evaluation of Sandwich Composite Structures,” Proc. ASME Noise
and Acoustic Methods in Processing and Characteristics of Advanced Materials and
Structures, Ed., by V. Dayal, U. Vaidya and R. Mantena, pp. 197-202, 1997 ASME
International Mechanical Engineering Congress and Exposition, Dallas, TX., Nov. 11,
1997.
139. Greer, J., and Palazotto, A., “Application of a Total Lagrangian Corotational Finite
Elemnt Scheme to inflation of Tire,” Intl. J. Solids and Structures, Vol. 37, No. 27,
pp.3541-3570, 1997.
140. Herup, E., and Palazotto, A., “Low Velocity Impact Damage Initiation in
Graphite/Epoxy Nomex Honeycomb - Sandwich Plates,” Composite Science and
Technology, Vol. 57, pp. 1581-1598, 1997.
141. Gummadi, N., and Palazotto, A., “Large Strain Analysis of Beams and Arches
Undergoing Large Rotations,” Intl. Journal Nonlinear Mechanics, Vol. 33, No. 4, pp.
615-648, 1998.
142. Greer, J. and Palazotto, A., “Tire Contact Using Two-Dimensional Finite
Elements,” ASCE, Journal of Engineering Mechanics, Vol. 124, No. 3, pp. 348-
357, March, 1998.
143. Raouf, R., and Palazotto, A., “Dynamic Instability of Tires Under Asymmetric
Loads,” ASCE, Journal of Aerospace Engineering, Vol. 11, No. 2, pp. 32-36, April,
1998.
144. Pai, F, Palazotto, A., and Greer, J., “Polar Decomposition and Appropriate Strains and
Stresses for Nonlinear Structural Analyses,” Computers & Structures, Vol. 66, No. 6,
pp. 823-840, 1998.
145. Gummadi, N., and Palazotto, A., “Progressive Failure Analysis of Composite
Cylindrical Shells Considering Large Rotations,” Journal of Composites Part B, Vol.
29B, pp. 547-563, 1998.
146. Palazotto, A., Gummadi, N., Vaidya, V., and Herup, E, “Low Velocity Impact
Damage Characteristic of Z-Fiber Reinforced Sandwich Panels - An Experimental
Study,” Composite Structures, Vol. 43, No. 4, pp. 275-288, Dec., 1998.
147. Gummadi, N., and Palazotto, A., “Progressive Failure Analysis of Laminated Beams
and Arches Undergoing Large Rotations,” Mechanics of Composite Materials and
Structures, Vol. 6, pp. 69-93, 1999.
148. Gummadi, N, and Palazotto, A., “Nonlinear Dynamic Finite Element Analysis of
Composite Cylindrical Shells Considering Large Rotations,” AIAA Journal, Vol. 337,
No. 11, pp. 1489-1494, Nov. 1999.
149. Palazotto, A., Herup E., and Gummadi, N., “Finite Element Analysis of Low Velocity
Impact on Composite Sandwich Plates,” Composite Structures, Vol. 49, pp. 209-227,
June, 2000.
150. Palazotto, A., Naboulsi S., and Greer, J., “Static- Dynamic Analyses of Toroidal
Shells,” ASCE, Journal of Aerospace Engineering, Vol. 13, No. 3, pp. 110-121, July,
2000.
151. Naboulsi, S, and Palazotto, A., “Thermodynamic Damage Model for Composites
Under Severe Loading,” ASCE, Journal of Engineering Mechanics, Vol. 126, No. 10,
pp 1001-1011, October, 2000.
152. Vaidya, U., and Palazotto, A., “Low Velocity Impact and Compression-After-Impact
Response of Z-Pin Reinforced Core Sandwich Composites’, ASME, Journal of
Engineering Materials and Technology, Vol. 122, pp 434-442, October, 2000.
153. Naboulsi, S., and Palazotto, A., “Thermomicromechanical Damage in Composites,”
AIAA Journal, Vol. 39, No. 1, pp 141-152, January, 2001.
154. Spottswood, S., and Palazotto, A., “Progressive Failure Analysis of a Composite
Shell,” Composite Structures, Vol. 53, pp 117-131, 2001.
155. Pai, F., and Palazotto, A., “A Higher-order Sandwich Plate Theory Accounting For 3D
Stresses,” International Journal of Solids and Structures, Vol. 38, No. 30-31, pp 5045-
5062, July-August, 2001.
156. Perel, V, and Palazotto, A., “Finite Element Formulation for Cylindrical Bending of a
Transversely Compressible Sandwich Plate Based on Assumed Transverse Strains”,
International Journal of Solids and Structures, Vol. 38, No. 30-31, pp 5373-5409,
July-August, 2001.
157. Boatwright, J., and Palazotto, A., “Fatigue Loading Considerations for a Composite
Cylindrical Shell with a Square Cutout,” International Journal of Computational
Engineering Science, Vol. 2, No. 2, pp 223-248, 2001.
158. Greer, J., and Palazotto, A., “Nonlinear through Thickness Behavior of a Toroidal
Shell Using 2-D Finite Elements”, ASME AD-Vol.65/ASD-ol 249, pp 305-317,
Nov.,2001.
159. Perel, V., and Palazotto, A., “Finite Element Formulation for Thick Sandwich Plates
on an Elastic Foundation”, AIAA Journal, Vol. 40, No. 8, pp1627-1637, August,
2002.
160. Voyiadjis, G., Palazotto, A., and Gao, X., “Modeling of Metallic Materials at High
Strain Rates with Continuum Damage Mechanics”, ASME, Applied Mechanics
Review, Vol.55, No. 5, pp 481-493, September, 2002.
161. Perel V., and Palazotto, A., “Finite Element Formulation for Dynamics of
Delaminated Composite Beams with Piezoelectric Actuators”, Int. J. of Solids and
Structures, Vol. 39, pp 4457-4483, 2002.
162. Naboulsi, S, and Palazotto, A., “Nonlinear Static-Dynamic Finite Element
Formulation for Composite Shells”, Int. J. Non-Linear Mechanics, Vol. 38, pp 87-110,
2003.
163. Perel, V., and Palazotto, A., “Dynamic Geometrically Nonlinear Analysis of
Transversely Compressible Sandwich Plates”, Int. J. of Non-Linear Mechanics
Vol.38, pp337-356, 2003.
164. Naboulsi, S., and Palazotto, A., “Damage Model for Metal Matrix Composite under
High Intensity Loading”, Int. J. of Plasticity, Vol. 19, pp 435-468, 2003.
165. Voyiadjis G., Abu Al-Rub, R., and Palazotto, A., “Nonlocal Coupling of
Viscoplasticity and Anisotropic Viscodamage for Impact Problems Using the Gradient
Theory”, Arch of Mechanics, Vol.55, No 1, pp 39-89, 2003.
166. Laird, D., and Palazotto, A., ‘Effect of Temperature on the Process of Hypervelocity
Gouging”, AIAA Journal, Vol. 41, No. 11, pp 2251-2260., November, 2003.
167. Lanning D., Palazotto, A., and Nicholas, T., “HCF Notch Predictions Based on
Weakest Link Failure Models”, Int. J. of Fatigue, Vol. 25, 2003, pp 835-841.
168. Laird, D., and Palazotto, A., “Gouging Development During Hypervelocity Sliding
Impact”, Int. J. of Impact Engineering, Vol. 30, No. 2, pp 205-223, 2004.
169. Voyiadjis G., Abu Al Rub R., and Palazotto, A., “Thermodynamic Framework for
Coupling of Non-local Viscoplasticity and Non-local Anisotropic Viscodamage for
Dynamic Localization Problems Using Gradient Theory”, Int. J. of Plasticity, Vol. 20,
pp 981-1038 2004.
170. Petel, R, and Palazotto, A., “Finite Element Method Based Model to Study High Cycle
Fatigue in Turbine Blades, J. of Aerospace Engineering ASCE Vol 4, No. 7 pp 45-
55, 2004 (This paper was awarded the best paper in the Journal for the year 2004).
171. Perel, V.and Palazotto, A., “A Nonlinear Model of Composite Delaminated Beams with
Piezoelectric Actuators Accounting for Nonpenetration Constraints for Delaminated
Crack Faces”, J. of Nonlinear Dynamics and System Theory, Vol. 4, No.2, pp 161-194,
2004.
172 Ivancic, F., and Palazotto, A., “Experimental Considerations for Determining the
Damage Coefficients of Hard Coatings”, J. Aerospace Engineering ASCE, Vol 8, No.
1, pp 8-17, 2005.
173 Szmerekovsky A., Palazotto, A., and Baker, W., “Scaling Numerical Models for
Hypervelocity Test Sled Slipper Rail Impacts”, J. Impact Engineering, pp 928-946, 2006.
174 Szmerekovsky, A., and A. Palazotto, “Structural Dynamic Considerations for a
Hydrocode Analysis of Hypervelocity Test Sled Impact”, AIAA Journal, Vol.44, No.6, pp
1350-1359, 2006.
175 Pollak, A. Palazotto, and T. Nicholas, “A Simulation Based Investigation of the Staircase
Method for Fatigue Strength Testing”, Int Journal of Mechanics of Materials, Vol.38, pp
1170-1181, 2006
176 Voyiadjis, G., Al-Rub R., and A. Palazotto, “On the Small and Finite Deformation
Thermo-elastic-viscoplasticity Theory: Algorithmic and Computational Aspects”,
European Journal of Computational Mechanics, Vol.15, No. 7-8, pp 945-987, 2006.
177 Cinnamon, J., Palazotto A., and Kennan, Z., “Material Characterization and
Development of a Constitutive Relationship for Hypervelocity Impact of 1080 steel
and VascoMax 300”, Int. J. Impact Engineering, Vol.33, pp 180-189, 2006.
178 Cinnamon, J., and Palazotto, A., “Metallographic Examination and Validation of
Thermal Effects in Hypervelocity Gouging”, J. of Pressure Vessel Technology,
ASME, Vol.129, pp 133-140, February, 2007.
179 Cinnamon J., and Palazotto, A., “Further Validation of a General Approximation for
Impact Penetration Depth Considering Hypervelocity Gouging Data”, Int J. of Impact,
Vol.34, pp 1307-1326., 2007.
180 Vanderwaker, R. Palazotto A., and Cobb, R.,” Damage Detection through Analysis of
Modes and Partially Constrained Plates”, J. Aerospace Engineering, ASCE, Vol.20,
No.2, pp 90-94, April, 2007.
181 Blackwell, C., Palazotto, A., George T., and Cross, C., “The Evaluation of the
Damping Characteristics of a Hard Coating on Titanium”, J. Shock and Vibration,
Vol.14, pp 37-51, 2007.
182 Cinnamon, J., Palazotto, A., Szmerekovsky, A., and Pendleton, R., “Investigation of
Scaled Hypervelocity Gouging Model and Validation of Material Constitutive
Models”, AIAA Journal, Vol.45, No.5, pp 1104-1112, 2007.
183 Yun, S. and Palazotto, A., “Damage Mechanics Incorporating Two back Stress
Kinematic Hardening Constitutive Models”, J. Engr. Fracture Mechanics, Vol. 74, pp
2844-2863, 2007
184 Pai, F. and Palazotto, A., “Two-Dimensional Sublamination Theory for Analysis of
Functionally Graded Plates”, J. of Sound and Vibration, Vol. 308, pp 164-189, 2007.
185 Shepherd, M. Cobb, R., Peterson, G., and Palazotto, A., “Quasi-Static Optics Based
Surface Control of an In-Plane Actuated Membrane Mirror”, AIAA, J. of Spacecraft
and Rockets, Vol. 44, No. 4, pp 953-963, 2007.
186 Fredrickson, B., Schoeppner, G., Mollenhauer, D., and Palazotto, A., “Application of
Three-Dimensional Spline Variational Analysis for Composite Repair”, J. of
Composite Structures, Vol. 83, pp. 119- 130, 2008.
187 Cinnamon, J., Palazotto, A. and Szmerekovsky, A., “Further Refinement and
Validation of Material Models for Hypervelocity Gouging Impacts”, AIAA Journal,
Vol. 46, No. 2, pp 317-327, 2008.
188 Voyiadjis, G., Abu Al-Rub, R., and Palazotto, A., “Constitutive Modeling and
Simulation of Perforation of Targets by Projectiles”, AIAA Journal, Vol. 46, No. 2, pp
304-316, 2008.
189 Yun, S. and Palazotto, A., “Plastic Deformation Under Cyclic Loading Using Two
Back Stress Hardening Models”, Intl. J. of Fatigue, Vol. 30, pp 473-482, 2008.
190 Pai, F. and Palazotto, A., “Detection and Identification of Nonlinearities by Amplitude
and Frequency Modulation Analysis’, J. Mechanical Systems and Signal Processing,
Vol. 22, pp 1107-1132, 2008.
191 Cameron, G., and Palazotto, A., “An Evaluation of High Velocity Wear”, J. of Wear,
Vol. 265, pp 10066- 1075, 2008.
192 Voyiadjis, G., Aknasru, A., and Palazotto, A., “A Physically Based Constitutive
Model for FCC Metals with Applications to Dynamic Hardness”, published in
Continuum Models and Discrete Systems, editors Dominique Jeulin and Samuel
Forest, Mines Paristech Les Presses, pp 213-222, 2008.
193 Andrews, J., Palazotto, A., De Simio, M., and S. Olson, “Lamb Wave Propagation in
Varying Isothermal Environments”, Structural Health Monitoring, Vol. 7, No. 2, pp
265-270, 2008.
194 Cinnamon, J. and Palazotto, A., “ Analysis and Simulation of Hypervelocity Gouging
Impacts for a High Speed Sled Test”, Intl. J. of Impact Engineering, Vol. 36, pp. 254-
262, 2009.
195 Shephard, M., Cobb, R.., Palazotto, A, and Baker, W,” Model Transformation Method
for Deformable Membrane Mirrors”, Journal of Guidance, Control, and Dynamics”,
Vol. 32, No. 1, pp 276-289,2009.
196 Reed, S., Palazotto, A., and Baker, W., “An Experimental Technique for the
Evaluation of Strain Dependent Materials Properties of Hard Coatings”, J. Shock and
Vibration, Vol.15, pp 697-712, 2008.
197 Pollak, K. and Palazotto, A., “A Comparison of Maximum Likelihood Models for
Fatigue Strength Characterization in Materials Exhibiting a Fatigue Limit”, J.
Probabilistic Engineering Mechanics, Vol. 24, pp 236-241, 2009.
198 Larson, R., Palazotto, A., and Gardenier, H., “Impact Response of Titanium and
Titanium Boride Monolithic and Functionally Graded Composite Plates”, AIAA
Journal, Vol. 47, No. 3, pp 675-691, 2009.
199 Han, S., Palazotto, A., and Leikeas, C., “Finite Element Analysis of Lamb Wave
Propagation in a Thin Aluminum Plate”, J. Aerospace Engineering, ASCE, pp 185-
197, April, 2009.
200 Holstein, R., Palazotto, A., and Cobb, R., “Structural Design Considerations of an
Inflatable Rigidizable Space Shuttle Experiment”, J. Aerospace Engineering, ASCE,
pp 123-133,2009.
201 Larson,R.,and Palazotto, A., “ Property Estimation in FGM Plates Subjected to Low
Velocity Impact Loading”.J. of Mechanics of Materials and Structures, Vol. 4, Nos. 7-
8, pp 1429-1451, 2009.
202 Deliktas, B., Voyiadjis, G., and Palazotto, A., “Simulation of Perforation and
Penetration in Metal Matrix Composite Materials Using a Coupled Viscoplastic
Damage Model, Composite: Part B. pp 434-442, 2009.
203 Voyiadjis, G., Deliktas, B., and Palazotto, A., “Thermodynamically Consistent
Coupled Viscoplastic Model for Perforation and Penetration in Metal Matrix
Composite Materials”, Composite, Part B, pp 427-433, 2009.
204 Abu Al-Rub, R., and Palazotto, A., “ Micromechanical Theoretical and
Computational Modeling of Energy Dissipation due to Nonlinear Vibration of Hard
Ceramic Coatings with Microstructural Recursive Faults” Int. J. of Solids and
Structures, Vol. 47, pp 2131-2142, 2010.
205 Piece, C., Palazotto, A., and Rosenberger,A., “ Creep and Fatigue Interaction in the
PWA 1484 Single Crystal Nickel base Alloy”, J. Material Science and Engineering, A,
Vol. 527, pp 7484-7489, 2010.
206 Sims, T., Palazotto,A.,and Norris, A., “ A Structural Dynamics Analysis of a Manduca
Sexta Forewing”, Intl J. of Micro Air Vehicles, Vol. 2, No. 3, pp 119-140, September,
2010.
207 Lodygowoski, A.,Voyiadjis,G.,and Palazotto, A., “ Non-local Numerical Formulation
for Dry Sliding Friction and Wear at High Velocities”, Intl. J. of Plasticity, Vol. 27, pp
1004-1024,2011.
208 Tubbs, T., and Palazotto, A., “ Biological Investigation of Wing Motion of the
Manduca Sexta”, Int. J. of Micro Air Vehicles, Vol. 3, No. 2, pp 101-112, June, 2011.
209 Shepherd, M,, Cobb, R., Palazotto, A., and Baker, W., Scaling Analysis of Large Scale
Space- Based Membrane Optics”, AIAA Journal, Vol. 49, No. 7,pp 1313-1323, July,
2011.
210 Deleon, N., and Palazotto, A., “The Evaluation of a Biologically Inspired Engineered
MAV Wing Compared to the Manduca Sexta Wing Under Simulated Flapping
Conditions”, Int. J. of Micro Air Vehicles, Vol. 3, No. 3, pp 149-168, September, 2011
211 Palazotto, A., and Meador, S., “Consideration of Wear at High Velocities Using a
Hydrocode”, AIAA, Journal, Vol. 50, No. 3, pp 746-751, March, 2012.
212 Gardener, H., Palazotto,A, .,and Larson, R. “Development and Investigation of a
Slotted Beam Impact Experiment of Intermediate Strain Rates”, J. of Aerospace
Engineering, ASCE, Vol. 25, No. 2, pp 294-307, April, 2012.
213 Abu-Al Rub, R., and Palazotto,A, ., “Nonlocal Gradient Dependent Constitutive
Model for Simulating Localized Damage and Fracture of Viscoplastic Solids Under
High Energy Impacts”, J. of Multiscale Computational Engineering, Vol. 10, No. 5, pp
503-526, 2012
214 Hale, C., Palazotto, A., and Baker, W., “Engineering Approach for the Evaluation of
Mechanical Wear Considering the Experimental Holloman High Speed Test Track”, J.
Engineering Mechanics, ASCE, Vol. 138, No. 9, pp 1127-1140, and September, 2012.
215 Hollenbeck, A., and Palazotto,A, ., “Methods Used to Evaluate the Hawkmoth
(Manduca Sexta) as a Flapping Wing Micro Air Vehicle”, Int. J. of Micro Air
Vehicles, Vol. 4, No. 2, pp 119-132, June, 2012.
216 Sabot, J., and Palazotto, A, “Structural Performance of Composite Material for a
Slotted Wave Guide Antenna Stiffened Structure Under Compression”, J. Composite
Structures, Vol, 92, pp 202-212, 2013.
217 O’Hara, R., and Palazotto, A, “The Morphological Characterization of the Forewing of
the Manduca Sexta Species for the Application of Biomimetic Flapping Wing Micro
Air Vehicles”, IOP Science, Bioinsperation and Biomimetic, Vol. 7, 13pp, 2012
218 Demasi., L., Palazotto,A., Hollenbeck, A., and Cavellaro, R., “Exploratory Structural
Investigation of a Hawkmoth Inspired MAV’s Thorax”, Int. J. Micro Air Vehicles,
Vol. 4, No. 4, pp 291-304,December, 2012
219 Norris, A., Palazotto,A.,and Cobb, R., “Experimental Structural Dynamic
Characterization of the Hawkmoth (Manduca Sexta) Forewing”, Int. J. Micro Air
Vehicles, Vol. 5, No. 1, pp 39-54, March, 2012.
220 Voyiadjis, G., Almasri, A., Faghihi, D., and Palazotto,A., “ Analytical Solution for
Shear Bands in Cold-Rolled 1018 Steel”, J. of Mechanical Behavior of Materials, Vol.
20, No. 4-6, pp 89-102, 2012.
221 Hollenbeck, P., Palazotto, A., and Willis, M.,” Mechanical Characterization of Flight
Mechanism in the Hawkmoth Manduca Sexta”’, J. Experimental Mechanics, Vol. 53,
No. 7, pp 1189-1199,2013.
222 Buentello, R., and Palazotto, A., “Thermal Contributions to the Mechanical High-
Speed Sliding Wear”, Intl. Test and Evaluation Journal, Vol. 35, No. 2, pp 182-
199,2014.
,
223 Easterday, O., Palazotto, A., Baker, W., Branum, R., and George, T., “Thermal Issues
in Development of an Apparatus to Enable Characterization of Coatings”, J. of
Materials Science and Engineering with Advanced Technology, Vol. 9, No. 2, pp 69-
107,2014.
224 Cranston, B., Palazotto, A.,” Evaluation of the Thorax of Manduca Sexta for Flapping
Wing Micro Air Vehicle Application, Int. J. Micro Air Vehicle, Vol.6, No. 3, pp 191-
2014, 2014.
225 Cox, G., Palazotto, A., Brown, J., and George, T., “Travelling Wave Excitation: A
Method to Produce Consistent Experimental Results”, ASME, J. of Engineering for
Gas Turbines and Power, Vol. 136, pp 122502-1 to 122502-8, December, 2014.
226 O’Hara, R., Deleon, N., and Palazotto, A., “Structural Identification and Simulation of
a MAV Forewing”, J. of Composite Structures, Vol. 119, pp 315-321, 2015.
227 Abu-Al Rub, R., Ettehad, M., and Palazotto, A., “Microstructural Modeling of Duel
Phase Steel Using a Higher- Order Gradient Plasticity Damage Model”, Int. J. of
Solids and Structures, Vol. 58, pp 178-189, 2015.
228 Abed, N., Abu-Al Rub, R., and Palazotto, A., “Computational Modeling of the Effect
of Equaxiel Heterogeneous Microstructures on Strength and Ductility of Dual Phase
Steels”, J. Computational Material Science, Vol. 103, pp 20-37, 2015.
229 Adomo- Rodriquez R., and Palazotto, A., “Nonlinear Structural Analysis of an
Icosahedron under an Internal Vacuum”, AIAA, J. Aircraft, Vol. 52, No. 3, pp 878-
883, 2015.
230 Buentello-Hernandez, R., and Palazotto, A. “ Development of a Model Considering
High-Speed Wear”, Journal of Aerospace Engineering, ASCE, Vol. 25, No. 5,
04014140, September-October, 2015.
231 Abu-Al-Rub, R, Abid, N. Ettehad, M., and Palazotto, A., “ Microstructural Modeling
of Duel Phase Steel Using a Higher Order Gradient Plasticity Model”, Applied
Mechanics and Materials, Vol. 784, pp 119-128, 2015.
232 Alban, C., Palazotto, A., and Rutledge, J., “Thermal Considerations with Respect to
Sliding Contact at High Speed”, Journal of Thermophysics and Heat Transfer, Vol. 30,
No. 1, pp 54-61, January-March,2016.
233 Song, R., Muliana, A., and Palazotto, A., “Analyzing Time and Temperature
Dependent Response of NARloy-Z”, Computational Materials Science, Vol. 115, pp
26-40, 2016.
234 Song, R., Muliana, A., and Palazotto, A., “An Empirical Approach to Evaluate Creep
Responses in Polymers and Polymeric Composites and Determination of Design
Stress”, Composite Structures, Vol. 148, pp 207-223, 2016.
235 Wuertemberger, L., and Palazotto, A., “Evaluation of Flow and Failure Properties of
Treated 4130 Steel”, J. Dynamics Behavior, Vol. 2, pp 207-222, 2016.
236 Metlen, T., Palazotto, A., and Cranston, B., “Economic Optimization of Cargo
Airship”, CEA Aeronautical Journal, Vol. 7, No. 2, pp 287-298, 2016.
237 You, C., Palazotto, A., and Buentello, R., “Evaluation of Thermomechanical Damage
of a Slipper and Rail in a Rocket Sled System”, Journal of Testing and Evaluation,
Vol. 44, No.4, pp 1443-1453, 2016.
238 Just, L., Deluca, A., and Palazotto, A., Nonlinear Dynamic Analysis of an Icosahedron
Frame Which Exhibits Chaotic Behavior”, ASME Journal of Computational and
Nonlinear Dynamics, Vol. 12, pp 011006-1-10, January, 2017.
239 Abid, N, Abu-Al-Rub, R., and Palazotto, A., “Micromechanical Finite Element
Analysis of the Effects of Martensite Morphology on the Overall Mechanical Behavior
of Duel Phase Steel”, International Journal of Solids and Structures, Vol. 104-105, pp
8-24, 2017.
240 Easterday, O., Palazotto, A., Baker, W., and Branam, R., “Damping Properties of
Coatings at Elevated Temperatures”, Surface and Coatings Technology, Vol. 321, pp
186-199, 2017.
241 Cranston, B., Alghofaily, M., and Palazotto, A., “Design and Structural Analysis of a
Unique Structure under an Internal Vacuum”, Aerospace Science and Technology,
Vol. 68, pp 68-76, 2017.
242 Graves, W., Liu, D., and Palazotto, A., “Impact of an Additively Manufactured
Projectile”, J. Dynamic Behavior of Materials, Vol.3, pp 362-376, 2017.
243 Abid, N., Abu Al-Rub, R., and Palazotto, A., “Micromechanical Finite Element
Analysis of the Effects of Martinsite Particle Size and Ferrite Grain Boundaries on the
Overall Mechanical Behavior of Dual Phase Steel”, ASME, J. of Engineering
Materials and Technology, Vol. 139, 041006-1 to 041006-8, October, 2017.
244 Park, Y., Palazotto, A., Hale, C., and Jung, J., “Internal Longitudinal Damage
Detection in a Steel Beam Using Lamb Waves: Simulation and Test Study”, J.of
Intelligent Material Systems and Structures, Vol. 29(3), pp 411-422, 2018.
245 Provchy, Z., Palazotto, A., Flater, P., “Topology Optimization for Projectile Design”,
J. Dynamic Behavior of Materials, Vol. 4, pp 129-137, 2018.
246 Snider, J., and Palazotto, A., “Finite Element Design and Model Analysis of a
Hexakis Icosahedron Frame for use in a Vacuum Lighter-than- air Vehicle”, ASCE,
Journal of Engineering Mechanics, Vol. 144, No. 6, pp. 04018042-1 to 04018042-7,
2018.
247 Eisensmith, D., Palazotto, A., Langer, K., Charghouri, M, and Coratella, S., “Effects
of Laser Shock Peening Over Minimally Detectable Partial Through-Thickness
Surface Cracks”, ASTM, Journal Materials Performance and Characterization, Vol. 7,
No., 4, pp 759-778, 2018.
248 Patel, A., and Palazotto, A., “Design Methodology for Topology Optimization of
Dynamically Loaded Structure”, Journal of Dynamic Behavior of Materials, Vol. 5,
No. 1, pp. 59-64, March, 2019.
249 Al-Ketan., O., Rowshan, R., Palazotto, A., and Abu-Al-Rub, R., “On Mechanical
Properties of Cellular Steel “, Journal of Engineering Materials and Technology, Vol.
141, pp. 021009-1to 021009-12, April, 2019.
250 Knapp, K., Palazotto, A., Scott-Emukpor, O., Holycross, C.,” Enhanced Pre-Strain
Application for Goodman Data Generated with Vibration Based Testing”, Int. Journal
of Experimental Mechanics, Vol. 59, No. 2, pp. 263-276, 2019.
251 Engebretsen, Colin, Palazotto, A., and Langer, K., “Strain Rate Dependent FEM of
Laser Shock Induced Residual Stress”, Chapter 14, Challenges in Mechanics of Time-
Dependent Materials, Vol. 2, Editors: Arzoumanidis, A et.al. pp.109-114, 2018.
252 Liu, B., Palazotto, A., Nassiri, A., Vivek, A., and Daehn, D., “Experimental and
Numerical Investigation of Interfacial Microstructure in Fully Age-Hardened 15-5 PH
Stainless Steel During Impact Welding”, Journal of Material Science, Vol. 54, No. 13,
pp. 9824-9842, 2019.
253 Liu, B., Palazotto, A., Vivek, A., and Daehn, G., “Impact Welding of Ultra-High-
Strength Stainless Steel in Wrought vs. Additively Manufactured Forms”,
International Journal of Advanced Manufacturing Technology. Vol. 104, No. 9-12, pp.
4593-4604, 2019.
254 Palazotto, A., “Analysis of Nonlinear Free-Response of a Thin Plate Using Finite
Elements”, ASCE, Journal of Engineering Mechanics, Vol. 145, No. 7, pp. 06019003-
1-8, 2019.
255 Demasi, L. Palazotto, A., and Santarpia, E., “Starred Polyhedral Shell Reinforced with
Internal Pockets Considering an Internal Vacuum”, ASCE, Journal of Engineering
Mechanics, Vol.145, No. 9, pp. 04019064-1-15, 2019.
256 DeLeon, A., Baker, W., and Palazotto, A., “Modeling a Nonlinear Melt Region as a
Result of High-Speed Sliding”, AIAA Journal of Thermophysics and Heat Transfer,
Vol.33, No. 3, pp. 808-816, July-September, 2019.
257 Hanks, E., Palazotto, A., and Liu, D., “Effect of Surface Roughness on Ultrasonic
Inspection of Electron Beam Melting Ti-6Al-4V”, Journal of Defense Analysis and
Logistics”, Vol. 3, No. 2, pp. 131-141, 2019.
258 Newell, D., O’Hara, R., Cobb, G., Palazotto, A., “Mitigation of Scan Strategy Effects
and Material Anisotropy Through Supersolvus Annealing in LPBF IN718”, Material
Science & Engineering A, Vol. 764, pp. 138230 1-11, 2019.
259 Graves, D., Moore, K., and Palazotto, A., “Analysis of a Celestial Icosahedron Shaped
Vacuum Lighter than Air Vehicle”, Aerospace Science and Technology, Vol.95, pp.
105344-1-7,2019.
260 Abu Al-Rub, R., Lee, D., and Palazotto, A.,” Effective Anisotropic Elastic and Plastic
Yield Properties of Periodic Foams Derived from Triply Periodic Schoen’s I-WP
Minimal Surface’, ASCE, Journal of Engineering Mechanics, Vol. 146, No. 5, pp.
04020030-1-04020030-19, 2020.
261 Wonnell, L., and Palazotto, A., “Incorporation of Morphing Theory to Aerodynamic
Flows”, ASCE, Journal of Engineering Mechanics, Vol. 146, No/ 8, pp. 04020078-1-
04020078-11, 2020.
Publications and Presentations
1. “A Plane Stress Solution Using the Incremental Plasticity Theory Considering
Stress Unloading,” presentation at the ASCE Annual Meeting, Houston, Texas,
October, 1972.
2. “A Solution for the Elastic-Plastic Bifurcation Load,” presented at the 13th
Midwestern Conference, University of Pittsburgh, August 13-15, 1973. Published
in Developments in Mechanics, Vol. 7, pp. 1011-1026.
3. Uthenwoldt, G., and Palazotto, A., “An Elastic-Plastic Plane Stress Solution
Considering Unloading,” presented and published in the Symposium, Volume of
the 7th Southeastern Conference on Theoretical and Applied Mechanics, March,
21-22, 1974, Catholic University, pp. 385-398.
4. Instability of Stiffened Cylindrical Shells with Cutouts,” presented to NASA,
Langley Research Center, Structural Mechanics’ Branch, August 6, 1974.
5. Hartnett, M. and Palazotto, A., “Elastic-Plastic Deformation of a Half-Space Due to
Static Load Contact,” presented at the annual meeting of the American Society of
Lubrication Engineers, Atlanta, Georgia, May, 1975.
6. Uthenwoldt, G., and Palazotto, A.,” Experimental Study of Partially Loaded Plates
Considering Large Deflections,” presented at the ASCE National Meeting,
Philadelphia, PA, Sept. 27 - Oct. 1, 1976.
7. Uthenwoldt, G., and Palazotto, A., “Influence of Incremental Elastic-Plastic
Coefficients upon Plane Stress Solutions,” presented at ASCE Engineering Mechanics
Specialty Conference, University of Waterloo, Canada, May 26-28, 1976.
8. Janisch, R, and Palazotto, A., “An Experimental Study of Steel Fiber Reinforced
Concrete,” presented and published in Symposium Volume, Second International
Conference on Mechanical Behavior of Materials, Aug. 16-20, 1976, pp. 791-795.
9. Ciardullo, S., Palazotto, A., and Durocher, L., “Buckling of Plastically Anisotropic
Plates,” presented and published in symposium volume, 8th Southeastern
Conference on Theoretical and Applied Mechanics, Virginia Polytechnic Inst. and
State University, Blacksburg, VA, April 29-30, 1976, pp. 123-137.
10. Williams, J., and Palazotto, A., “Analysis of Stringer and Ring Stiffened Cylindrical
Shells with Cutouts,” presented at the IASS World Congress on Space Enclosures,
Montreal, Canada, July 4-9, 1976, published in the Conference Proceedings Vol. 1,
pp. 609-621.
11. Hartnett, M, Palazotto, A., and Tharp, T., “The Use of a Finite Difference Focusing
Technique,” presented at the Fifteenth Midwestern Mechanics Conference,
University of Illinois at Chicago Circle, March 23-25, 1977.
12. Deschler, W., and Palazotto, A., “Comparisons between Virtual Work and
Equilibrium Equations for Buckling of Rectangular plates Using Finite Difference
Methods,” presented at the Fifteenth Midwestern Mechanics Conference,
University of Illinois at Chicago Circle, March 23-25, 1977.
13. “Use of Prandtl-Reuss Equations for Indeterminately Loaded Rectangular Plates
with Varying Thickness,” presented at the Fifteenth Midwestern Mechanics
Conference, University of Illinois at Chicago Circle, March 23-25, 1977, also
presented at the ASCE National Convention, San Francisco, CA, Oct. 17-21, 1977.
14. Deschler, W., and Palazotto, A., “Comparing Trigonometric and Conventional
Finite Difference Approximations with the Finite Element Method for Plate
Buckling, presented and published in symposium Volume, Symposium on
Applications of Computer Methods in Engineering, University of Southern
California, August, 23-26, 1977, pp. 137-149.
15. Heise, H., and Palazotto, A., “Elastic-plastic Anisotropic Materials,” presented and
published in symposium volume, the First International Conference on
Mathematical Modeling, St. Louis, Missouri, August 29 - 1 September 1, 1977,
Vol. III, pp. 1697-1704.
16. Deschler, W., and Palazotto, A., “The Use of Trigonometric Finite Differences in
Virtual Work Expressions for Plate Stability,” presented and published in
symposium volume, The First International Conference on Mathematical Modeling,
St. Louis, Missouri, August 29 - 1 September, 1977, Vol. III, pp. 1409-1419.
17. Uthenwoldt, G. and Palazotto, A., “Plane Stress and Strain Equations for Elastic-
Plastic Problems, Advances in Civil Engineering Through Engineering Mechanics,
proceedings, Second Annual EMD, Specialty Conference, North Carolina State
University, May 23-25, 1977, pp. 268-271.
18. Hartnett, M., Palazotto, A., and Tharp, T., “A New Approximate Approach Solution
for Elastic Body Contact in Roller Bearings,” presented and published by the
ASME Design Engineering Conference, April 17-20, 1978, Chicago, Illinois, paper
No. 78-DE - 18.
19. Brooks, G., Palazotto, A., and Whitney, J., and M. Knight, “The Determination of
Material Properties for Hybrid Composites,” presented at the 5th ASTM
Conference on Composite Materials, Testing and Design, March 20-21, 1978, New
Orleans, LA.
20. Hannah, S., and Palazotto, A., “A Finite Difference Approach Incorporating a
Truncated Fourier Series for Solving the Fourth Order Differential Equation
Considering Stability Analysis,” presented and published in Proceeding, Ninth
Southeastern Conference on Theoretical and Applied Mechanics, Vanderbuilt
University, May 4-5, 1978, pp. 453-465.
21. Harnett, M., Palazotto, A., and Pine, D., “Method for Extending Finite Difference
Analysis to Complicated Boundary Shapes,” presented and published by the Eighth
U.S. National Congress of Applied Mechanics, University of California at Los
Angeles, June 26-30, 1978.
22. “The State of the Art of Elastic-Plastic Analysis as Applied to Plates and Shells” -
Invited presentation at the ASCE Annual Convention, Boston, Mass., April, 1979. The
paper was published as part of the conference proceedings.
23. Smith, S, and Palazotto, A., “End Effect Considerations Related to Laminated
Composite Tension Specimens,” presented and published at the Annual Spring
Meeting of the Society for Experimental Stress Analysis, San Francisco, CA, May
15-20, 1979.
24. Smith, S, and Palazotto, A., “Investigation of Saint Venants’s Principle as Related
to Laminated Composite Plates,” presented at the ASCE Convention, Atlanta, GA,
October 29, 1979.
25. Taylor, R., Palazotto, A., and Crisp, J., “The Analysis of a Ring Stiffened
Cylindrical Shell Acting under a Concentrated Load,” presented at the Seventh
Canadian Congress of Applied Mechanics, University Sherbrooke, Quebec,
Canada, May 27 - June 1, 1979.
26. Mulholland M, and Palazotto, A., “The Effects of Prebuckling on Stiffened
Cylindrical Panels,” presented at the Seventh Canadian Congress of Applied
Mechanics, University of Sherbrooke, Quebec, Canada, May 27-June 1, 1979.
27. “Series Expansions for Finite Difference Approximations to Boundary Value
Problems,” presented and published in the Seventh ASCE Conference on Electronic
Computation, Washington, University, St. Louis, Missouri, August 6-8, 1979. pp.
274-287.
28. Witt, W., and Palazotto, A., “Compatible Nonlinear Strain-Displacement Relations
for Composite Shells,” presented at the 16th Annual Meeting, Society of
Engineering Science, Sept 5-7, 1979, Northwestern University, Evanston, IL.
29. Brooks, “G., and Palazotto, A., The Use of CLPT in Determining Material
Properties for Hybrid Composites,” presented at the Second International
Conference on Mathematical Modeling and published in the proceedings, July 11-
13, 1979, St. Louis, MO.
30. Hinrichsen, R., and Palazotto, A., “Viscoelastic Finite Element Model of the
Human Intervertebral Joint,” published and presented at the 9th Annual Northeast
Bioengineering Conference, Rutgers University, March 19-20, 1981,
Bioengineering, Pergamon Press, pp.355-361.
31. Witt, W., and Palazotto, A., “Nonlinear Collapse Analysis of a Laminated
Composite Plate with Circular Cutouts,” presented at the Joint ASME/ASCE
Mechanics Conference, June 22-24, 1981, Boulder, Colorado.
32. Hinnerichs, T., and Palazotto, A., “Consideration of Visco-plasticity Using Variable
Time Steps,” presented at the Joint ASME/ASCE Mechanics Conference, June 22-
24, 1981, Boulder, Colorado.
33. “The Similarity of a Numerically Expressed Fourier Series Approximation with the
Finite Element Technique,” presented at the 17th Midwestern Mechanics
Conference, University of Michigan, May 6-8, 1981.
34. Insprucker, J., and Palazotto, A., “The Use of a Fourier Series Approximation in
Finite Difference Equations Considering Variable Meshes,” presented at the 3rd
International Conference of Mathematical Modeling, University of Southern
California, July 29-31, 1981.
35. Hinnerichs, T., and Palazotto, A., “Overstress Versus Continuous Functional Stress
Strain Formulation for Visco-plasticity as Applied to a Cracked Geometry,”
presented at the ASCE Annual Convention, Oct 27-31, 1980, Hollywood, FL.
36. Tischler, V., Palazotto, A., and Vankayya V., “Dynamic Analysis of Supersonic
Sled,” presented at the 8th Vibration Conference, ASME, Sept. 20-23, 1981,
Hartford, CT, ASME paper #81-Det.-42.
37. Peck, L., and Palazotto, A., “Effects of Corrugation on Collapse of Rectangular
Plates”, published by AIAA, paper #81-1737, Aircraft Systems and Technology
Conference, August, 1981, Dayton, OH.
38. Bohum, M., and Palazotto, A., “Creep Crack Growth Behavior Using the
Malvern/Norton Equation,” presented at the ASCE Convention, Las Vegas, NV,
April, 1982.
39. Smail, J., and Palazotto, A.,” The Visco-plastic Crack Growth Behavior of a
Compact Tension Specimen Using the Bodner-Partom Flow-Law,” presented at the
ASCE Convention,” Las Vegas, NV, April, 1982.
40. Smail, J., and Palazotto, A., “Visco-plastic Crack Growth in a Compact Tension
Specimen Considering Compliance Measurement,” presented at the Ninth U.S.
National Congress of Applied Mechanics, Cornell University, Ithaca, NY, June 21-
25, 1982.
41. Furlong, D., and Palazotto, A., “Characteristics of Normal and Herniated
Intervertebral Joint,” presented at the Thirty-fifth Annual Conference on
Engineering in Medicine and Biology, Sept 22-24, 1982, Philadelphia, PA
42. Allen, L., and Palazotto, A., “An Analysis of the Human Intervertebral Joint
Considering Orthotropic and Viscoelastic Properties”, presented at the sixth Annual
Meeting of the American Society of Biomechanics, October 14 and 15, 1982,
Seattle, WA.
43. Gans, H., and Palazotto, A., “Finite Element Analysis for Visco-plastic and Plastic
Fracture Mechanics Problems Using Isoparametric and Constant Strain Elements”,
presented at the ASCE Annual Convention, October 25-29, 1982, New Orleans,
LA.
44. Rothwell, W., and Palazotto, A., “A Finite Element Analysis of the Creep Response
of the Trabecular Bone,” presented at the Society for Experimental Stress Analysis
Spring Meeting, Cleveland, OH, May 15-20, 1983.
45. Schmitz, “D., and Palazotto, A., Static and Transient Visco-plastic Analysis of An
Unlined Tunnel,” presented at the ASCE Engineering Mechanics Specialty
Conference, Purdue University, May 23-25, 1983.
46. Keck, J., and Palazotto, A., “Visco-plastic Fatigue Effects at Elevated Temperatures
for a Superalloy,” presented at the ASCE Engineering Mechanics Specialty
Conference, Purdue University, May 23-25, 1983.
47. Insprucker, J., and Palazotto, A., “Optimized Wave Parameter in Finite Difference
Equations,” presented at the ASCE 8th Conference on Electronic Computations
Proceedings, pp. 436-453, February, 1983.
48. Janisse, J., and Palazotto, A., “Collapse Analysis of Cylindrical Composite Panels with
Cutouts,” published in AIAA Publication No. 83-0875-CP, 24th
AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference,
Lake Tahoe, May, 1983.
49. Wilson, R., and Palazotto, A., “Visco-plastic Fatigue Effects on Crack Mechanics,”
presented at the ASCE Fifth Engineering Mechanics Specialty Conference, August,
1983.
50. Herbert, J., and Palazotto, A., “Comparison between Experimental and Numerical
Buckling of Curved Cylindrical Composite Panels,” presented at Proceedings,
Twelfth Southeastern Conference on Theoretical and Applied Mechanics, pp. 124-
129, May, 1984.
51. Janise, T., Palazotto, A., and Sobota, M., “Experimental/Analytic Comparisons
Considering Composite Panels with a Cutout,” presented at the Fifth International
Conference on Experimental Mechanics, Montreal, Canada, June, 1984.
52. Flanagan, G., and Palazotto, A., “Composite Laminate Optimization,” presented at
the Symposium on Structures, Washington, DC, October 21-25, 1984.
53. Henkel, C., and Palazotto, A.,” Visco-plastic Crack Closure Characteristics
Comparing CTS and Center Crack Specimens,” presented at the 26th Structures,
Structural Dynamics and Materials Conference, Orlando, FL, April, 1985, AIAA -
85-0669.
54. Malik, B., Palazotto, A., and Whitney, J., “Notch Strength of Gr/Peek Composite
Material at Elevated Temperatures,” presented at the 26th Structures, Structural
Dynamics and Materials Conference, Orlando, FL, April, 1985, AIAA-85-0648.
55. Hinrichsen, R., and Palazotto, A., “The Nonlinear Finite Element Analysis of
Thick Composite Plates Using a Cubic Spline Function,” presented at the 26th
Structures, Structural Dynamics and Materials Conference, Orlando, FL, April,
1985, AIAA-85-0718.
56. Seifert, G., and Palazotto, A., “The Effects of Center Delamination on the
Instability of Composite Cylindrical Panels,” presented at the 1985 Spring
Conference on Experimental Mechanics, Las Vegas, NV, 9-14, June, 1985.
57. Henkel, C., and Palazotto, A., “Visco-plastic Low Cycle Fatigue of Compact
Tension and Center Crack Specimens,” presented at the 18th National Symposium
on Fracture Mechanics, University of Colorado 24-27, June, 1985.
58. Hinrichsen, R., and Palazotto, A., “The Use of a Cubic Spline Function in Finite
Elements,” presented at the Fifth International Conference on Mathematical
Modeling,” Berkeley, CA, 29-31, July, 1985.
59. Hinrichsen, R., and Palazotto, A., “Nonlinear Finite Element Analysis of Thick
Composite Plates Using a Cubic Spline Function,” presented at the 19th Midwestern
Mechanics Conference, 8-11, September, 1985.
60. “An Experimental Study of a Composite Panel with a Cutout,” presented at the 19th
Midwestern Mechanics Conference, 9-11, September, 1985, Ohio State University.
61. Palazotto, A., and Mercer, J., “Nonlinear Algorithms for Fracture Mechanics,”
presented at the ASCE Convention, Seattle, WA, April 8, 1986.
62. “An Experimental Study of a Composite Panel with a Cutout,” presented at the
Composite Materials Testing and Design: Eighth Symposium, Charleston, SC,
April, 30, 1986.
63. Bednarz, E., Palazotto, A., and Nicholas, T., “An Analytical Investigation of
Plasticity Induced Closure Involving Short Cracks,” presented at the International
Symposium on Fatigue Crack Closure, Charleston, SC, May 2, 1986.
64. Straw, A., and Palazotto, A., “The Buckling of Composite Cylindrical Panels
Considering Environmental Effects,” presented at the SDM Conference, San
Antonio, TX, paper #86-0879CP, May, 1986.
65. Horban, B., and Palazotto, A., “The Experimental Buckling of Cylindrical
Composite Panels with Eccentrically Located Circular Delamination,” presented at
the SDM Conference, San Antonio, TX, paper #86-0882 CP, May 19, 1986.
66. Ramey, J., and Palazotto, A., “Comparisons of AP C-2 with AP C-1 and Gr/Ep at
High Temperatures,” presented at the SEM Conference, New Orleans, LA, June 11,
1986.
67. Cron, S., Palazotto, A., and Sandhu, R., “Design of an off-Axis Test Fixture for a
Composite Specimen,” presented at the SEM Conference, New Orleans, LA, June
10, 1986.
68. Bowlus J., Palazotto, A., and Whitney, J., “The Effect of Shear Deformation and
Rotary Inertia on the Vibration of Anisotropic Laminated Plates,” presented at the
Tenth US National Congress of Applied Mechanics, Austin, TX, June 17, 1986.
69. Henkel, C., Palazotto, A., and Bednarz, E., “Low Cycle Fatigue Effect on Cracks at
High Temperatures,” presented at the Nineteenth National Symposium on Fracture
Mechanics, San Antonio, TX, June 30, 1986.
70. Ramey, J., and Palazotto, A., “The Fracture Mechanisms for Gr/Peek under Tension
and Compression”, presented at the ASCE Structure Congress, Sept 15, 1986, New
Orleans, LA.
71. Harris, F., and Palazotto, A., “Two-Dimensional Elastic Fracture Analysis by the
Indirect Boundary Element Method,” presented at the Fourth Intl. Conference on
Num. Methods in Fracture Mechanics, published in proceedings, pp. 1-15, 1987.
72. Keller, R., Palazotto, A., and Bai, S., “Examination of High-Performance Fibers
under Compressive Deformation,” presented at the AIAA 28th SDM Conference,
Monterey, CA, April 6, 1987, paper AIAA 87-0759.
73. Kelly, W., Palazotto, A., and Ruh, R., “Thermal Shock Resistance of Mullite Based
Silicon Carbide Whisker Composite,” presented at the 89th Annual Meeting of the
American Ceramic Soc., April 28, 1987, Pittsburgh, PA.
74. Kelly, W., Palazotto, A., and Ruh, R., “Thermal Shock Characteristics of Ceramic
Composites; presented at the ASCE Engineering Mechanics Specialty Conference,
Buffalo, NY, May 22, 1987.
75. Palazotto, A., Maddux, E., and Horban, B., “The Use of Stereo X-ray and Deply
Techniques for Evaluating Instability of Composite Cylindrical Panels with
Delaminations,” presented at the 1987 SEM Conference on Experimental Mechanic
Proceedings, pp. 341-352.
76. Tisler, T., and Palazotto, A., “Experimental Collapse Determination of Cylindrical
Composite Panels with Large Cutouts under Axial Load,” presented at the 1987
SEM Conference on Experimental Mechanics, Proceedings, pp. 353-361.
77. Bednarz, E., and Palazotto, A., “A Finite Element Investigation of Viscoplastic
Induced Closure of Short Cracks at High Temperatures,” presented at the ASTM
20th Symposium on Fracture Mechanics, Lehigh University, June 23, 1987.
78. “A Finite Element Analysis of The Viscoelastic Interaction between the Nucleus
Pulposes and Annulus Fibrosis,” presented at the Sixth International Conference on
Mathematical Modeling, August 4-7, 1987, St. Louis, MO.
79. Dennis, S., and Palazotto, A., “An Overview of Incremental Numerical Techniques
for Solving a Geometrically Nonlinear Static Shell Problem,” presented at the 20th
Midwestern Mechanics Conference, Purdue University, August 31-September 2,
1987, Proceedings, pp. 1173-1179.
80. Ramey, J., and Palazotto, A., “A Study of Graphite/Peek under High Temperature,”
presented at the Symposium on Advances in Thermoplastic Matrix Composite
Materials/ASTM, October 19-20, 1987, BAL Harbour, Fl.
81. Wilder, B., and Palazotto, A., “A Study of Internal Delamination in Curved
Composite Panels,” presented at the AIAA SDM Conference, Williamsburg VA,
paper #88-2255, April 18-20, 1988.
82. Dennis, S., and Palazotto, A., “Shear Deformation Affects in Orthotropic
Cylindrical Pressure Vessels Using a Higher Order Shear Theory,” presented at the
AIAA SDM Conference, Williamsburg, VA, Paper #88-2291, April 18-20, 1988.
83. Cron, S., Palazotto, A., and Sandhu, R., “A Failure Criterion Evaluation for
Composite Materials,” presented at the ASTM 9th Symposium on Composite
Materials, Sparks, NV, April 29, 1988.
84. Martin, J., Palazotto, A., and Sandhu, R., “Failure Propagation in Thermoplastic
Composite Materials,” presented at the ASCE Engineering Mechanics Specialty
Conference, VPI&SU, May 23, 1988.
85. Palardy, R., and Palazotto, A., “Buckling of Composite Plates Using the Levy
Method,” presented at the ASME PVP Conference, Pittsburgh, PA, June 20, 1988.
86. Chestnut, G., and Palazotto, A., “Fatigue Crack Growth in a Round Notch Area
within a High Temperature Environment,” presented at the Symposium on
Constitutive Equations and Life Prediction Models for High Temperature
Applications, Berkley, CA, June 21, 1988.
87. Palazotto, A., and Mercer, J., “Evaluation of Short and Long Cracks Beginning
from a Notch in a C.T. Specimen at High Temperature,” presented at the ASTM
21st Symposium on Fracture Mechanics, Annapolis, MD, June 30, 1988.
88. Wilder, B., and Palazotto, A., “Study of Damage in Curved Composite Panels,”
presented at the ASCE “Space 88”, Albuquerque, NM, August 30, 1988.
89. Ruh, R., and Palazotto, A., “Application of Hasselman’s Theory in Evaluating
Thermal Shock of Ceramic Composites,” presented at the ASTM Symposium on
Thermal and Mechanical Behavior of Ceramic and Metal Matrix Composite,”
Atlanta, GA, Nov 7-8, 1988.
90. Dennis, S., and Palazotto, A., “The Effects of Large Movement on a Composite
Cylindrical Shell with Cutouts”, AIAA, paper #89-1398, presented at the 30th SDM
Conference, Mobile, AL, April 3-5, 1989.
91. Egan, G., Palazotto, A., and Olsen, J., “The Analysis of a Composite Shell
Structure,” AIAA paper #89-1297, presented at the 30th SDM Conference, Mobile,
AL, April 3-5, 1989.
92. Shih, K., and Palazotto, A., “Application of the Boundary Element Technique to
Rectangular Plates,” presented at the 7th International Conference on Mathematical
and Computer Modeling, August 4, 1989, Chicago, IL.
93. Tsai, C., and Palazotto, A., “The Application of Rik’s Technique to Shell
Snapping,” presented at the 7th International Conference on Mathematical and
Computer Modeling, August 4, 1989, Chicago, IL.
94. Wilder, B., and Palazotto, A., “The Characteristics of an Implanted Delamination
within a Cylindrical Composite Panel,” presented at the Third Symposium on
Composite Materials, ASTM, Nov 6-7, 1989, Orlando, FL.
95. Silva, K., Palazotto, A., and Tsai, C., “Finite Element Investigation of a Composite
Cylindrical Shell under Transverse Load with Through Thickness Shear and
Geometric Snapping,” presented at the XV SECTAM Conference, Atlanta GA,
proceedings, pp. 677-685, March 22-23, 1990.
96. Raouf, R., and Palazotto, A., “Nodal Interaction in the Dynamics of Orthotropic Shell
Panels,” presented at the XV SECTAM Conference, Atlanta, GA, Proceedings, pp.
685-686, March 22-23, 1990.
97. Fisher, J., and Palazotto, A., “The Evaluation of Failure Characteristics for Gr/Peek at
250? F”, presented at the Symposium on Materials Characterization by
Thermomechanical Analysis, ASTM, March 19-20, 1990, Philadelphia, PA.
98. Daniels, J., Palazotto, A., and Sandhu, R., “Failure Characteristics in Thermoplastic
Composite Laminates Due to an Eccentric Circular Discontinuity,” presented at the
AIAA SDM Conference, Long Beach, CA, AIAA - 90-1181-CP, April, 1990.
99. Dennis, S., Palazotto, A., and Tsai, C., “Snapping Characteristics of Laminated
Cylindrical Panels under Transverse Loading”, presented at the AIAA SDM
Conference, Long Beach, CA, AIAA - 90-0924 CP, April 1990.
100. Schimmels, S., and Palazotto, A., “Collapse Characteristics of Free-Edge Cylindrical
Composite Panels under Axial Loads”, presented at the AIAA SDM Conference, Long
Beach, CA, AIAA - 90-0923, April, 1990.
101. Smith, L., and Palazotto, A., “Macrocrack - Multiple Defect Interaction”, presented at
the Eleventh U.S. National Congress of Applied Mechanics, The University of
Arizona, Tucson, AZ, May 22-25, 1990.
102. Levraea, J., Palazotto, A., and Maddux, E., “Eccentricity Effects of a Square Cutout
on the Resonant Frequencies and Mode Shapes of Curved Composite Panels”,
presented at the Experimental Mechanics Conference, Albuquerque, NM, June 4-6,
1990.
103. Perry, R., Palazotto, A., and Sandhu, S., “Impact Response of Graphite Epoxy
Cylindrical Panels,” Paper No. AIAA-91-1078CP, Proceedings of the SDM
Conference, Baltimore, MD., (8-10 April 1991).
104. Chien, L., Palazotto, A., and Taylor, W., “Stability Characteristics of Laminated
Cylindrical Panels Under Transverse Loading,” Paper No. AIAA-91-0914CP,
Proceedings of the SDM Conference, Baltimore, MD., (8-10 April 1991).
105. Chien, L., and Palazotto, A., “A Damping Model for the Vibration of Nonlinear
Composite Cylindrical Panels with Higher-Order Transverse Shears,” ASCE
Engineering Mechanics Specialty Conference, Columbus, Ohio, (May 1991).
106. Chien, L., and Palazotto, A., “Nonlinear Snapping Characteristics for Laminated
Cylindrical Panels with Higher-Order Shear Deformation Theory,” Proceedings pp.
4-E-1 to 4-E-10, presented at the 8th Intl. Conference on Composite Materials,
Honolulu, Hawaii, (15-19 July 1991).
107. Raouf, R., and Palazotto, A., “Nonlinear Dynamics of Anisotropic Shell Panels,”
Proceedings pp. 32-R-1 to 32-R-9, presented at the 8th Intl. Conference on
Composite Materials, Honolulu, Hawaii, (15-19 July 1991)
108. Taylor, W., Palazotto, A., and Chien, L., “Dynamic Instability Characteristics of
Laminated Composite Panels,” presented at the 1st U.S. Computational Mechanics
Conference, July, 1991, Chicago, Ill.
109. “Snapping Phenomenon of Cylindrical Shell,” presented at the 2nd Intl. Conference
on Industrial and Applied Mathematics, July 8-12, 1991, Washington DC
110. Raouf, R., and Palazotto, A., “A Symbolic Numerical Study of the Nonlinear
Vibration of Laminated Shell Panels,” presented at the 22nd Midwestern Mechanics
Conference, University of Missouri at Rolla, October 6-9, 1991.
111. Dennis, S., and Palazotto, A., “Buckling of Laminated Plates and Shells Via the
Fully Linerized Approach,” Preprint ESP28.91012, 28th Annual Technical Meeting
of the Society of Engineering Science, Gainesville FL, November 608, 1991.
112. Smith, S., and Palazotto, A., “Comparison of Eight Variations of a Higher Order
Theory for Cylindrical Shells,” presented at the AIAA SDM Conference, April 13-
15, 1992, Dallas, Texas, (#92-2229).
113. Dennis, S., and Palazotto, A., “Instability in a Cylindrical Panel Subjected to
Normal Pressure,” presented at the AIAA SDM Conference, April 13-15, 1992,
Dallas, Texas, and (#92-2234) pp. 100-109.
114. Perry S., Palazotto, A., and Sandhu, R., “Low Velocity Impact of Composite Shells
- Theory and Experimentation,” presented at the Space ‘92 Conference, Denver CO,
June 1-3, 1992. Also, published in proceedings.
115. Raouf, R., and Palazotto, A., “Nonlinear Dynamics of Orthotropic Panels”
presented at the Seventh Technical Conference on Composite Materials, Penn. State
University, October 13-15, 1992, pp. 1001-1008, proceeding
116. Greer, J., and Palazotto, A., “The Numerical Considerations in Characterizing the
Dynamic Response of a Composite Shell Structure,” paper (#93-1374) presented at
the AIAA SDM Conference, April 19-22, 1993 La Jolla CA
117. Shimmels, S., and Palazotto, A., “Nonlinear Material Analyses of Laminated
Composite Shell Structures with Large Deformations and Strains,” presented at the
AIAA SDM Conference, April 19-22, 1993 La Jolla CA.
118. Forral, A., and Palazotto, A., “Comparison of Donnell and Higher Order Nonlinear
Models for Dynamically Loaded Composite Plates and Shells,” presented at ASCE,
Space 94, Albuquerque NM, 1 March 1994, pp. 99-108, Conference Proceedings.
119. Miller, D., and Palazotto, A., “Large Deformation Theory Using Truncated
Rotations,” presented at ASCE Space 94, Albuquerque NM, 1 March 1994, pp.
137-146, Conference Proceedings.
120. Raouf, R., and Palazotto, A., “A Nonlinear Dynamic Analysis of a Toroidal Shell,”
presented at the AIAA SDM Conference, Hilton Head SC, paper No. 94-1348,
1994.
121. Greer, J., and Palazotto, A., “A Simple Model for Developing Time Step Criteria
for Nonlinear Dynamic Finite Element Analysis of Composite Cylindrical Shells,”
presented at the AIAA SDM Conference, Hilton Head SC, Paper (#84-1555) 1994.
122. “The Comparison between Different Shell Higher-Order Shear Deformation
Characteristics,” presented at the First Industrial/Academic Symposium on
Research for Future Supersonic and Hypersonic Vehicles, pp. 279-282, December
5-7, 1994, Greensboro NC.
123. Pai, F., and Palazotto, A., “Modeling and Analysis of Highly Flexible Beams,”
presented at the First Industrial/Academic Symposium on Research for Future
Supersonic and Hypersonic Vehicles, pp. 384-389, December 5-7, 1994,
Greensboro NC.
124. Raouf, R., and Palazotto, A., “Nonlinear Analysis of Orthotropic Toroidal Shells
under Radial Loads,” presented at the 36th AIAA Structures, Structural Dynamics
and Materials Conference, April 10-13, 1995, New Orleans LA, Paper # AIAA 95-
1349.
125. Eldred, L, Baker, W. and Palazotto, A., “Application of Fractional Derivative
Model Constitutive Relations for Viscoelastic Materials,” presented at the 36th
AIAA Structure, Structural Dynamics and Material Conference, April 10-13, 1995,
New Orleans LA, Paper # AIAA 95-1426.
126. Raouf, R., and Palazotto, A., “Nonlinear Dynamic Characteristics of a Composite
Toridal Shell,” presented at the 10th ASCE Specialty Conference on Engineering
Mechanics May 21-24, 1995, Boulder CO, Proceedings Vol. 2, pp. 1358-1361.
127. Dennis, S., and Palazotto, A., “Nonlinear Composite Plate Displacement
Considering Transverse Shear,” presented at the 10th ASCE Specialty Conference
on Engineering Mechanics, May 21-24, 1995, Boulder CO. Proceedings Vol. 2, pp.
1362-1367.
128. Gummadi, N., and Palazotto, A., “On the Finite Element Modeling of Large
Rotations,” Presented at the 1995 Aerospace Atlantic Conference, Dayton OH, May
22-25, 1995.
129. Eldred, L., Baler, W., and Palazotto, A., “Application of Fractional Order
Constitutive Relations to Tire Modeling,” presented at the 1995 Aerospace Atlantic
Conference, Dayton OH, May 22-25, 1995.
130. Greer, J., and Palazotto, A., “A Total Lagrangian Corotational Nonlinear Finite
Element Analysis Scheme for Rotating Composite Shells,” presented at the 1995
Aerospace Atlantic Conference, Dayton OH, May 22-25, 1995.
131. Greer, J., and Palazotto, A., “A Corotational Total Lagrangian Finite Element
Analysis of Composite Plates and Shells,” presented at the Third U.S. National
Congress of Computational Mechanics, June 10-12, 1995, Dallas TX.
132. Pai, F., and Palazotto, A., “Three Dimensional Postbuckling Analyses of Highly
Flexible Beams,” Presented at the 36th AIAA Structures, Structural Dynamics, and
Materials Conference, April 10-13, 1995. New Orleans LA, Paper (#AIAA 95-
1349)
133. Raouf, R., and Palazotto, A., “Nonlinear Dynamics of Toroidal Shells,” presented
at the AFOSR workshop on Structural Analysis of Shells with Application to
Aircraft Tires, Dayton OH, July 6 1995.
134. Greer, J., and Palazotto, A., “Jaumann Stress - Strain Application to Shells with
Large Rotations,” presented at the AFOSR Workshop on Structural Analysis of
Shell with Application to Aircraft Tires, Dayton OH, July 6, 1995.
135. Gummadi, N., and Palazotto, A., “Green Strain - 2nd Piola Stress Application to
Shells with Large Movement,” presented at the AFOSR Workshop on Structural
Analysis of Shells with Application to Aircraft Tires, Dayton OH, July 6, 1995.
136. Baker, “W., and Palazotto, A., Rubber Viscoelastic Modeling Using Fractional
Derivatives,” presented at the AFOSR Workshop on Structural Analysis of Shells
with Application to Aircraft Tires, Dayton OH, July 6, 1995.
137. Gummadi, N., and Palazotto, A., “Effects of Thickness and Curvature on the
Natural Frequencies of Composite Arches and Shells,” presented at the ASME
Design Conference, Boston MA, September 1995.
138. Gummadi, N., and Palazotto, A., “Total Lagrangian Approach to Nonlinear Finite
Element Analysis of Cylindrical Shells Considering Large Rotations,” presented at
the 37th AIAA Structures, Structural Dynamics and Materials Conference, Salt
Lake City, Utah, April 15-17 1996, paper (#AIAA 96-1592).
139. Raouf, R., and Palazotto, A., “Dynamics Instability of Composite Toroidal Shells
Under Pulsating Internal Pressure,” Presented at the 37th AIAA Structures,
Structural Dynamics and Materials Conference, Salt Lake City, Utah, April 15-17,
1996, paper (#AIAA 96-1407.
140. Herup, E., and Palazotto, A., “Low Velocity Impact Damage Initiation in Graphite
Epoxy Nomex Honeycomb Sandwich Plates,” Presented at the 37th AIAA
Structures, Structural Dynamics and Materials Conference, Salt Lake City, Utah,
April,15-17 1996, Paper#AIAA 96-1519.
141. Herup, E., Palazotto, A., and Harrington, T., “An Experimental Investigation of
Sandwich Flat Panels under Low Velocity Impact.” Presented at the 11th
Engineering Mechanics Conference, ASCE, Fort Lauderdale, FL, May 19-22, 1996,
Proceedings, Vol.1, pp.401-407.
142. Greer, J., and Palazotto, A., “Application of a Total Lagrangran Corotational Finite
Element Scheme to the Aircraft Tire,” presented at the SAE Aerospace Atlantic
Conference, Dayton, OH, May 22, 1996.
143. Gummadi, N., and Palazotto, A., “A Nonlinear Shell Analysis Using Green Strain”,
presented at the SAE Aerospace Atlantic Conference, Dayton, OH, May 22, 1996.
144. Greer, J., and Palazotto, A., “A Corotational Lagrangian Application with Large
Movements,” presented at the ASCE Space 96 Conference at Albuquerque, NM,
June 3, 1996, published in the proceedings, Vol. 2, pp. 1108-1114.
145. Raouf, R., and Palazotto, A., “Effect of Fiber Waviness on the Buckling of
Composite Plates”, presented at the ASCE Space 96 Conference at Albuquerque,
NM, June 3, 1996.
146. Palazotto, A., Gummadi, N. Vaidya, U, and Herup, E., “Low Velocity Impact
Damage Characterization of Z-Fiber Reinforced Sandwich Panels. An
Experimental Study,” presented at the 38th SDM Conference, AIAA, paper #AIAA
97-1057, Orlando, FL., April 6-9, 1997.
147. Gummadi, N., and Palazotto, A., “The Nonlinear Dynamic Finite Element Analysis
of Composite Cylindrical Shells Considering Large Rotation,” presented at the 38th
SDM Conference, AIAA, paper #AIAA 97-1234, Orlando, FL., April 6-9, 1997.
148. Gummadi, N., and Palazotto, A., “Progressive Failure Analysis of Cylindrical
Shells Undergoing Large Rotation,” presented at the Mechanics Conference,
Northwestern University, Evanston, IL. June 29 - July 2, 1997.
149. Raouf, R., and Palazotto, A., “Critical Speed Calculations for Pressurized Spinning
Orthotropic Toroidal Shells,” presented at the Fourth U.S. National Congress on
Computational Mechanics, San Francisco, CA, Aug. 6-8, 1997.
150. Gummadi, N., Palazotto, A., and Greer, J., “Quasi Static Nonlinear Finite Element
Analysis of Rotating Composite Shells Undergoing Large Rotations,” presented at
the Fourth U.S. National Congress on Computational Mechanics, San Francisco,
CA. Aug. 6-8, 1997.
151. Palazotto, A., and Naboulsi, S., “Nonlinear Dynamic Finite Element Analysis of
General Composite Shells Using Lagrangian Formulation,” presented at the 39th
AIAA, SDM Conference, Long Beach, CA, paper #AIAA 98-2083, April, 1998.
152. Palazotto, A., and Gummadi, N., “Snapping Characteristics of Cylindrical Shell
Panels Considering Failure Phenomena,” presented at the 12th Engineering
Mechanics Conference, ASCE, LaJolle, CA. May, 1998.
153. Palazotto, A., Gummadi, N., and Mayer, A., “Characterizing the Nonlinear
Dynamics of Composite Cylindrical Shells including Material Failure,” presented at
the International Conference on Computational Engineering Science, Atlanta, GA,
October 5-9, 1998, pp. 758-765, Vol. I of proceedings.
154. Palazotto, A., Naboulsi S, and Mayer, A., “Damage Model for Viscoelastic
Composites,” presented at Plastisticity 99, Jan. 5-13, 1999, Cancun, Mexico,
proceedings, pp. 663-666, Jan. 1999.
155. Greer, J., and Palazotto, A., “Nonlinear Through - Thickness Behavior of Shells
Using 2-D Finite Elements,” presented at the 40th SDM Conference, St. Louis, MO.,
AAIA paper #99-1236, April 11-14, 1999.
156. Palazotto, A., Herup, E., and Gummadi, N., “Finite Element Analysis of Low
Velocity Impact on Composite Sandwich Plates,” presented at the 40th SDM
Conference, St. Louis, MO., AIAA paper #99-1274, April 11-14, 1999.
157. Naboulsi, S., Palazotto, A. and Mayer, A., “Thermomicromechanical Model of
Damage for a Composite Structures,” presented at the 40th SDM Conference, St.
Louis, MO., AIAA #99-1323, April 11-14, 1999.
158. Palazotto, A., and Baker, W., “Modeling of Sandwich Plate Dynamics under Low
Velocity Impact,” presented at the SEM Conference, Cincinnati, OH., June 7-9,
1999.
159. Naboulsi, A, and Palazotto, A., “Damage Model for Composites,” presented at the
SEM Conference, Cincinnati, OH. June 7-9, 1999.
160. Spottswood, S., and Palazotto, A., “Comparisons between Analysis and
Experimentation of Composite Panels,” presented at the SEM Conference,
Cincinnati, OH. June 7-9, 1999.
161. Palazotto, A., and Gummadi, N., “Finite Element Analysis of Failure Modes in Zpin
Sandwich Panels with Comparisons to Experimentations,” presented at the
ASME 1999 Mechanics and Material Conference, VPI and State University,
Blacksburg, VA., June 27-30, 1999.
162. Naboulsi, S., and Palazotto, A., “Damage Characteristics in a Composite Laminated
Beam,” presented at the ASME Pressure Vessel and Piping Conference, Boston,
MA., Aug. 1-5, 1999.
163. Naboulsi, S., Palazotto, A., and Mayer, A., “Damage Characteristics in
Composites,” presented at the Fourteenth Technical Conference, American Society
for Composites, Dayton, Ohio, September 27-29, 1999, proceedings, edited by J.
Whitney, pp 75-84.
164. Naboulsi, S., and Palazotto, A., “Inflated Space Structural Analysis,” presented at
the 25th Annual Dayton-Cincinnati Aerospace Science Symposium, Dayton, Ohio,
March 30, 2000.
165. Boatwright, J., and Palazotto, A., “Progressive Failure of a Composite Cylindrical
Shell with a Cutout under Fatigue Loading,” presented at the 25th Annual Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March 30, 2000.
166. Pai, F., and Palazotto, A., “A Higher Order Sandwich Plate Theory Accounting For
3D Stresses,” Paper #AIAA 2000-1475, presented at the 41st AIAA SDM
Conference, Atlanta, GA, April 3-6, 2000.
167. Palazotto, A., and Naboulsi, S., “An Investigation of Geometric Imperfections in
Parabolic Inflated Space Structures,” paper #AIAA 2000-1729, presented at the 41st
AIAA SDM Conference, Atlanta, GA, April 3-6, 2000.
168. Boatwright, J., and Palazotto, A., “Progressive Failure Analysis of a Composite
Cylindrical Shell with a Square Cutout,” presented at the ASCE Engineering
Mechanics Conference, University of Texas, Austin, TX, May 22-24, 2000.
169. Palazotto, A., and Naboulsi, S., “Damage Evolution Analysis of Composite,”
presented at the ASCE Engineering Mechanics Conference, University of Texas,
Austin, TX, May 22-24, 2000.
170. Vaidya, U., and Palazotto, A., “Processing and Characterization of Multi-Functional
Distributed Space Core Sandwich Composites,” presented at the International
Conference of Computational Engineering and Sciences, Anaheim, CA, August 21-
25, 2000.
171. Naboulsi, S., and Palazotto, A., “Elastic-Plastic Damage Model for Composites
Under High Intensity Loading,” presented at the 15th Technical Conference of the
American Society of Composites, Texas A&M University, September 24-27,2000,
published in the Proceedings, pp343-354.
172. Naboulsi, S, and Palazotto, A., “Analysis of a Toroidal Solar Array”, presented at
the Naecon Conference, Dayton, OH, October 6-10, 2000.
173. Palazotto, A., and Forral, A., “Nonlinear Dynamic Analysis of Plates and Shells
Considering Chaotic Behavior”, presented at the ASME symposium on Nonlinear
Shell Dynamics, Orlando, FL, November 6-10, 2000.
174. Shipman, W., and Palazotto, A., “The Development of a Finite Element Program to
Model High Cycle Fatigue in Isotropic Plates,” 26th Annual Dayton-Cincinnati
Aerospace Science Symposium, March, 30, 2001.
175. Perel, V., and Palazotto, A., “Three-Dimensional Dynamic Stress and Failure
Analysis of Sandwich Panels,” 26th Annual Dayton-Cincinnati Aerospace Science
Symposium, March, 30, 2001.
176. Laird, D., and Palazotto, A., “Hydrocode Simulation of High-Speed Test Track
Slipper-Rail Gouging,” 26th Annual Dayton-Cincinnati Aerospace Science
Symposium, March, 30, 2001.
177. Laird, D., and Palazotto, A., “High Speed Test Track Slipper/Rail Gouging
Phenomena Simulations,” Presented at the 2001 ASME Pressure Vessels and Piping
Conference, July 22-26,2001, Atlanta, GA., ASME Proceeding “Structures Under
Extreme Loading Conditions”, pp 61-68.
178. Boatwright, J., and Palazotto, A., “Finite Element Analysis and Progressive Failure
of a Composite Cylindrical Shell with a Square Cutout”, Presented at the Sixth U.S.
National Congress on Computational Mechanics, August, 1-3, 2001, Dearborn, MI.
179. Greer, J., and Palazotto, A., “Nonlinear Through-Thickness Behavior of a Toroidal
Shell Using 2-D Finite Elements”, Proceedings of the 2001 ASME International
Mechanical Engineering Congress and Exposition, November, 11-16,2001, New
York, NY, AD-Vol 651 AMD-Vol 249, pp 305-317.
180. Lofthouse, A., Hughson, M., and Palazotto, A., “Hypersonic Test Sled External
Flow Field Investigation Using Computational Fluid Dynamics”, 40th AIAA
Aerospace Science Meeting and Exhibit, January, 14-18, 2002, Reno, NV., AIAA
2002-0306.
181. Laird, D., and Palazotto, A., “Temperature Effects on the Gouging of Material
Subject to Hypervelocity Sliding Impact”, presented at the 27th Dayton-Cincinnati
Aerospace Science Symposium, March, 2002.
182. Tabiei, A., and Palazotto, A., “Three-Dimensional Visco Plastic Material Model for
Finite Element Simulation of the Gouging Phenomenon”, presented at the 27th
Dayton-Cincinnati Aerospace Science Symposium, March 2002.
183. Patel, R., and Palazotto, A., “FEM Based Model to Study HCF in Turbine Blades
Using Simplified Geometry”, Presented at the 27th Dayton-Cincinnati Aerospace
Science Symposium, March 2002.
184. Ivancic, F., and Palazotto, A., “Viscoelastic Damping for High Cycle Fatigue of
Titanium” presented at the 27th Dayton-Cincinnati Aerospace Science Symposium,
March, 2002
185. Shipman, W., and Palazotto, A., “The Consideration of High Cycle Fatigue in a
Turbine Blade”, presented at the 43rd AIAA SDM conference Denver, CO, April
22-24, 2002 AIAA 2002-1537.
186. Palazotto, A. and Laird, D., “Temperature Effects on the Gouging and Mixing of
Solid Metals during Hypersonic Sliding Impact”, presented at the 43rd AIAA SDM
conference Denver CO, April 22-24, 2002. AIAA 2002-1691.
187. Lanning, D., Palazotto, A., and Nicholas, T., “High Cyclic Fatigue Predictions of
Notch Components Using Weakest Link Failure Model”, presented at the 7th
National Turbine Engine High Cycle Fatigue Conference, Palm Beach Gardens, Fl.,
May 14-17, 2002.
188. Palazotto, A., and Lanning, D. and Nicholas, T., “HCF Notch Predictions Based on
Weakest Link Failure Models”, presented at the International Conference on
Fatigue Damage of Structural Materials, Hyannis, MA, September, 23-27, 2002.
189. Palazotto, A., and Perel, V., “Consideration of Thru-the-Thickness Strains for a
Sandwich Panel”, presented at the 17th Technical Conference, American Society of
Composites, Purdue University, IN., October, 21-23, 2002.
190. Palazotto, A., Ivancic, F., and Cross, C., “The Effect of a Hard Coating on the
Damping and Fatigue Life of Titanium”, paper AIAA 2003-1689, presented at the
44th AIAA SDM conference, Norfolk, VA., April, 7-10, 2003.
191. Palazotto, A., and Patel, R., “Combined Experimental and Analytical Study of HCF
in Turbine Blades Using Simplified Geometry”, paper AIAA 2003-1755, presented
at the 44th AIAA SDM conference, Norfolk, VA., April 7-10, 2003.
192. Palazotto, A., and Patel, R., “FEM Based Model to Study HCF in Turbine Blades
Using Simplified Geometry”, presented at the SAMPE 2003, Long Beach, CA, May
11-15, 2003.
193. Voyiadjis, G., Abu Al-Rub, R., and Palazotto, A., “Determination of the Material
Intrinsic Length Scale of Gradient Plasticity Theory”, presented at the Symposium
on Multiscale Modeling of Plasticity, The Tenth International Symposium of
Plasticity, Quebec, Canada, July 7-11,2003
194. Voyiadjis, G., Abu Al-Rub, R., and Palazotto, A., “Thermodynamic Framework for
Coupling of Viscoplasticity and Viscodamage for Dynamic Localization Problems
Using Gradient Theory”, presented at the 16th ASCE Engineering Conference,
Seattle, WA, July 16-18, 2003.
195. Voyiadjis, G., Abu Al-Rub, R., and Palazotto, A., “A Gradient –Displacement
Constitutive Model to Simulate Impact Damage Problems”, AIAA-2004-1919,
presented at the 45th AIAA SDM conference, Palm Springs, CA, April 19-22,2004.
196. Palazotto, A., and Szmerekovsky, A., “Numerical Analysis for a Study of the
Mitigation of Hypervelocity Gouging “, AIAA-2004-1922, presented at the 45th
AIAA SDM conference, Palm Springs, CA, April 19-22,2004.
197. Palazotto, A., Lanning, D., and Nicholas, T., “Fatigue Failure Predictions at Stress
Concentrations Using Critical Distance Methods”, AIAA 2004-1999, Presented at
the 45th AIAA SDM conference, Palm Springs, CA, April 19-22,2004.
198. Voyiadjis, G., Abu Al-Rub, R., and Palazotto, A., “A Gradient Dependent
Constitutive Model to Simulate Impact Damage Problems”, The 45th SDM
conference AIAA, Palm Springs, CA. April, 19-22,2004.
199. Vanderwaker, R., Palazotto, A., and Cobb, R., “Experimental and Computational
Analysis of Modes in Partially Constrained Plates”, The 17th ASCE Engineering
Mechanics Conference, University of Delaware, Newark, Del. June 14-16, 2004
200. Voyiadjis, G., Aba Al-Rub, R., and Palazotto, A., “Determination of the Material
Length Scale from Microbending of Thin Film”, The 17th ASCE Engineering
Mechanics Conference, University of Delaware, Newark, Del. June 14-16, 2004.
.
201. Palazotto, A., Lanning L., and Nicholas, T., “Effects of Notch Geometry on
Critical Distance HCF Predictions”, presented at the Intl. Conference on Fatigue of
Structural Materials V, September, 19-24, 2004, Hyannis Port, Mass.
202. Voyiadjis, G. Abu Al-Rub, R., and Palazotto, A., “A Microdamage Model for High
Velocity Impact Using Nonlocal Theory “, AIAA 2005-235, The 46th SDM
conference AIAA, Austin TX., April, 21, 2005.
203. Nguyen, M, Palazotto, A., and Cinnamon, J., “Computational Methods for the
Treatment of Material Interfaces”, AIAA 2005-2354, The 46th SDM conference
AIAA, Austin TX., April, 21, 2005
204 Larson, R., and Palazotto, A., “Analysis and Simulation of the Elastic Impact
Response of Functionally Graded Material Plates”, presented at the 31st Annual
Dayton- Cincinnati Aerospace Science Symposium. March 8, 2006.
205 Reed, S., and Palazotto, A., “A Novel Experimental Technique for Determining
Strain Dependent Material Damping”, presented at the 31st Annual Dayton-
Cincinnati Aerospace Science Symposium. March 8, 2006.
206 Cinnamon, J., and Palazotto, A., “Analysis of Hypervelocity Gouging
Considering Non-Equilibrium Thermodynamics”, presented at the 31st Annual
Dayton- Cincinnati Aerospace Science Symposium. March 8, 2006.
207 Chapman, and Palazotto, A., “Characterization of Functionally Graded
Materials”, presented at the 31st Annual Dayton- Cincinnati Aerospace Science
Symposium. March 8, 2006.
208 Fredrickson, B., and Palazotto, A., “Modeling and Experimental Measurement of
Tensile Loaded Scarf and Stepped Lap Joints”, presented at the 31st Annual
Dayton- Cincinnati Aerospace Science Symposium. March 8, 2006.
209 Lee, D., and Palazotto, A., “Evaluation of Factors Contributing to Damping of
Coated and Uncoated Titanium Plates”, presented at the 31st Annual Dayton-
Cincinnati Aerospace Science Symposium. March 8, 2006.
211 Pendleton, R., and Palazotto, A., “Oblique Impact Comparison between
Experimental and Analysis of a Simplified Gouging Model”, presented at the 31st
Annual Dayton- Cincinnati Aerospace Science Symposium. March 8, 2006.
212 Cook, B., Palazotto, A., and Schoeppner, R.,” Thermal Mechanical Strain Fields
in Composite Scarf Joints”, Proceeding of the American Society for Composites,
20th Technical Conference, Lehigh University, Pa., September 6-7, 2005.
213 Cinnamon, J., and Palazotto, A., “Johnson – Cook Strength Model Constants for
VascoMax 300 and 1080 Steel”, Proceedings of the 14th APS (American Physical
Society) Topical Conference and Shock Compression of Condensed Matter,
Baltimore, MD, 31 July – 5 August, 2005
214 Cinnamon, J., and Palazotto, A., “Further Refinement of Material Models for
Hypervelocity Gouging Impacts”, Proceedings of the AIAA SDM conference
Paper # 2006-2086, Newport, R.I., May 1-4, 2006.
215 Cinnamon, j., and Palazotto, A., “Investigation of a Scaled Hypervelocity
Gouging Model and Validation of Material Constitutive Models”, Proceedings of
the AIAA SDM conference Paper # 2006-2087, Newport, RI, May 1-4,2006.
216 Voyiadjis, G., Palazotto, A., and Abed, F., “Adiabatic Shear Bending for
Different Metals at High Velocity Impact”, Proceedings of the AIAA SDM
conference Paper # 2006-2088, Newport, RI, May 1-4,2006.
217 Voyiadjis, G., Palazotto, A., and Abu Al-Rub, R., “Modeling and Simulation of
Perforation of Steel Plates by Blunt Projectiles”, Proceedings of the AIAA SDM
conference Paper # 2006-2089, Newport, RI, May 1-4,2006.
218 Szmerekovsky, A., and Palazotto, A., “An Improved Study of Temperature
Changes during Hypervelocity Sliding High Energy Impact”, Proceedings of the
AIAA SDM conference Paper # 2006-2090, Newport, RI, May 1-4, 2006
219 Cooley, G., and Palazotto, A., “Finite Element Analysis of Functionally Graded
Shell Panels under Thermal Loading”, Proceedings of the IMECE 2005, ASME
Intl. Mechanical Engineering Congress and Exposition, November 5-11, 2005,
Orlando, Fl.
220 Reed, S., and Palazotto, A., “Material Property Extraction from a Novel Free
Decay Experiment”, presented at the 32nd Annual Dayton-Cincinnati Aerospace
Science Symposium, March 6, 2007
221 Larson, R., and Palazotto, A., “Analysis of Wave Propagation in Functionally
Graded Circular Plates Under Impact Loading”, presented at the 32nd Annual
Dayton-Cincinnati Aerospace Science Symposium, March 6, 2007. (this paper
received the best paper award).
222 Cameron, G., and Palazotto, A., “Technique for Evaluating Hypervelocity
Wear”, presented at the 32nd Annual Dayton-Cincinnati Aerospace Science
Symposium, March 6, 2007.
223 Vanderhyde, M., and Palazotto, A., “Comparison of Thermodynamic Equilibrium
and Nonequilibrium Representations of Materials behind Shock Waves”, presented
at the 32nd Annual Dayton-Cincinnati Aerospace Science Symposium, March 6,
2007.
224 Walker, R., and Palazotto, A., “Analytical Solution to Nonlinear Flapping Beams
for Use with Micro Air Vehicle Design”, presented at the 32nd Annual Dayton-
Cincinnati Aerospace Science Symposium, March 6, 2007.
225 Andrews, J., and Palazotto, A., “Lamb Wave Propagation in Varying Thermal
Environments”, presented at the 32nd Annual Dayton-Cincinnati Aerospace Science
Symposium, March 6, 2007.
226 Sutter, D., and Palazotto, A., “Three-Dimensional Composite Scarf Repairs Analysis
and the Effect of Overply Shape Variation”, presented at the 32nd Annual Dayton-
Cincinnati Aerospace Science Symposium, March 6, 2007.
227 Cinnamon, J., and Palazotto, A., “Analysis and Simulation of Hypervelocity
Gouging Impacts for a High-Speed Sled Test”, Presented at the AIAA/ASME SDM
conference, Honolulu, Hawaii, April, 23-26, 2007, paper # AIAA 2007-1999.
228 Pai, F., and Palazotto, A., “Two-Dimensional Sublamination Theory for the
Analysis of Functionally Graded Plates”, Presented at the AIAA/ASME SDM
conference, Honolulu, Hawaii, April, 23-26, 2007, paper #AIAA 2007-2109.
229 Palazotto, A., “Research on the Consideration of Gouging at Holloman AFB”,
AFOSR Contractor meeting, Washington, DC, August, 15, 2006, Contract monitor
Dr John Schmisseur.
230 Larson, R., and Palazotto, A., “Analysis of Functionally Graded Circular Plates
Subjected to a Low Velocity Impact Event”, Conference of ASME Wright State
University, October, 16, 2006 (Best Paper Award).
231 Reed, S., and Palazotto, A., “Strain Dependent Material Properties of Hard
Coatings”,” Conference of ASME Wright State University, October, 16, 2006.
232 Larson R., and Palazotto, A., “Low Velocity Impact Analysis of Functionally Graded
Circular Plates”, Proceedings of the 2006 ASME Intl. Mechanical Engineering
Congress and Exposition, November, 5-10,2006, Chicago, Ill., paper # IMECE 2006-
14003.
233 Chronister, J., and Palazotto, A.,“Corrosion Effect on Structural Health Monitoring”,
Proceedings of the 2006 ASME Intl. Mechanical Engineering Congress and
Exposition, November, 5-10,2006, Chicago, Ill., paper # IMECE 2006-16280.
234 Vanderhyde, M., and Palazotto, A.,” Comparison of Thermodynamic Equilibrium
and Nonequilibrium Representation”, ASCE 18th Engineering Mechanics Division
Conference, Blacksburg, VA, June, 3-6, 2007.
235 Larson, R., and Palazotto, A., “Initial Wave Propagation in Functionally Graded
Circular Plates”, ASCE 18th Engineering Mechanics Division Conference,
Blacksburg, VA, June, 3-6, 2007.
236 Voyiadjis, G. Abu Al-Rub, R. and Palazotto, A., “Simulation of the
micromechanics of localized damage and fracture in solids at high sped impacts “,
presented at the 9th U.S. National Congress on Computational Mechanics, San
Francisco, CA., July, 26, 2007.
237 Reed, S. and Palazotto, A, “Determining material properties of nonlinear materials
from transient response”, presented at the Intl. Mechanical Engineering Congress
and Exposition, Seattle, WA. November, 11-15, 2007
238 Palazotto, A., “Research on wear at high velocities”, AFOSR contractor meeting,
Washington DC September 18-19, 2007, Contract monitor Dr John Schmisseur
239 Abu Al-Rub, R., Voyiadjis, G., and Palazotto, A., ‘Microdamage constitutive model
and numerical simulation of perforation targets by projectiles”, presented at the Intl.
Mechanical Engineering Congress and Exposition, Seattle, WA. November, 11-15,
2007
240 Gardenier,.H.., and Palazotto, A., ‘ An experimental technique for property evaluation
of metals at intermediate strain rates”, presented at the 33rd annual Dayton- Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 4, 2008
239 Chmiel, A., and Palazotto, A.,” Material based finite element wear simulations”,
presented at the 33rd annual Dayton- Cincinnati Aerospace Science Symposium,
Dayton, Ohio, March, 4, 2008
240 Lee., J., and Palazotto, A., “Analysis of multi-layered materials under high velocity
impact using CTH”, presented at the 33rd annual Dayton- Cincinnati Aerospace
Science Symposium, Dayton, Ohio, March, 4, 2008
241 Hale, C. and Palazotto, A., “Consideration of wear at velocities greater than
200m/sec”, presented at the 33rd annual Dayton- Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 4, 2008.
242 Davidson, R., and Palazotto, A.,” Sensitivity of digital image correlation to subset and
step sizes”, presented at the 33rd annual Dayton- Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 4, 2008
243 Larson, R., and Palazotto, A., “Analysis of wave propagation in monolithic and
functionally graded Ti-TiB plates subject to impact loading”, presented at the AIAA
SDM conference, Schaumberg, Ill., April, 7-10, 2008
244 Hale, C., and Palazotto, A., “ Consideration of wear at velocities greater than
200m/sec”, presented at the AIAA SDM conference, Schaumberg, Ill., April, 7-10,
2008
245 Pai, F., and Palazotto, A., “Amplitude frequency modulation method for identification
of nonlinear structural vibration”, presented at the AIAA SDM conference,
Schaumberg, Ill., April, 7-10, 2008
246 Davidson, R., Mollenhauer, D., and Palazotto, A., „ A Comparison of Moiré
Interferometry and Digital Image Correlation“, present at the Composites Testing
and Model Identification Conference, Dayton, Ohio, October, 21, 2008
247 Easterday, O. and Palazotto, A., “Experimental Challenges for Mechanical
Characterization of Thermal Barrier Coatings Using a Free-Free Beam Setup at
Elevated Temperatures” presented at the 4th ASME Engineering Sciences
Symposium, WSU, October, 27, 2008.
248 Hale, C. and Palazotto, A., “Consideration of Wear at High Velocities”, ” presented at
the 4th ASME Engineering Sciences Symposium, WSU, October, 27, 2008
249 Palazotto, A., “ Research on wear at high velocities”, AFOSR contractor meeting,
Washington DC August, 16-17, 2008, Contract monitor Dr John Schmisseur
250 Deleon, A. and Palazotto, A., “Finite Element Analysis of Frequency Response
Functions for Thermal Barrier Coatings”, presented at the 34th Dayton- Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 3, 2009.
251 Easterday, o. and Palazotto, A., “Characterization of a TBC Experiment at High
Temperatures”, presented at the 34th Dayton- Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 3, 2009.
252 Morris, A. and Palazotto, A., “Structural Dynamics Characterization of a bio-inspired
Micro Air Vehicle Wing”, presented at the 34th Dayton- Cincinnati Aerospace
Science Symposium, Dayton, Ohio, March, 3, 2009.
253 Hale, C., and Palazotto, A., and Baker, W., “Characterization of Wear at High
Velocities”, presented at the 34th Dayton- Cincinnati Aerospace Science Symposium,
Dayton, Ohio, and March, 3, 2009.
254 Pierce, C., Palazotto, A., and Rosenberger, A., “Creep and Fatigue Interaction of a
Single Crystal Nickel Superalloy”, presented at the 34th Dayton- Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 3, 2009.
255 Pai, F. and Palazotto, A., “ Nonlinear Vibration Characterization of MAV Flapping
Wings”, presented at the 50th AIAA SDM Conference, Palm Springs, CA. March 4-
7, 2009, paper AIAA 2009- 2415.
256 Pai, F., and Palazotto, A., ‘ “Online Frequency and Amplitude Tracking of Nonlinear
Non-Stationary Structural Vibration”, presented at the 50th AIAA SDM Conference,
Palm Springs, CA. March 4-7, 2009, paper AIAA 2009-2526.
257 Hale, C., and Palazotto, A., and Baker, W., “Consideration of wear at High Velocities”
presented at the 50th AIAA SDM Conference, Palm Springs, CA. March 4-7, 2009,
paper AIAA 2009-2624.
258 Voyiadjis, G., Delektas, B., Lodygonski, A., Palazotto, A., and Phillipon, S., “ High
Rate and Frictional Effects in Wear of Metals Using Strain Gradient Plasticity”,
presented at the Workshop on Dynamic Behavior of Materials, Metz, France May 12,
2009.
259 Gardener, H., Palazotto, A., Larson, R., “ Am Experimental Technique for Developing
Intermediate Strain Rates on Ductile Metals”, presented at the 2009 Joint ASCEASME-
SES Conference on Mechanics, Blacksburg, VA., June, 24-27,2009.
260 Palazotto, A., Deleon, A., and Pearson, L., “Vibration Analysis of Commercial
Thermal Barrier Coatings”, presented at the 2009 Joint ASCE-ASME-SES
Conference on Mechanics, Blacksburg, VA., June, 24-27, 2009.
261 Abu Al-Rub, R. and Palazotto, A., “Two –Scale Computational Modeling of Fatigue
Damage of Hard Ceramic Coatings with Microstructural Recursive Faults”,
presented at the 2009 ASME Intl. Mechanical Engineering Congress and Exposition,
Lake Buena Vista, Florida, November, 13-19, 2009.
262 Palazotto, A., “Research as Related to High Velocity Wear”, presented as an
invited paper at the Test and Evaluation Conference, Nashville, Tennessee,
February 2, 2010.
263 Palazotto, A., “ Bio-inspired MAV Research”, presented at the MAV workshop,
Dayton, Ohio, February, 18,2010.
264 Paek, G.,Baker,W.,and Palazotto,A., “ Surface Temperature and Melt Profile Due
to Frictional Heating”, presented at the Dayton-Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March 9,2010.
265 Easterday, O., Palazotto, A., Branam, R., and Baker, W., “Characterization of
Thermal Barrier Coatings at Elevated temperature in a Free-Free System”,
presented at the Dayton-Cincinnati Aerospace Science Symposium, Dayton,
Ohio, March 9, 2010.
266 O’Hara, R., and Palazotto, A., “Material Property Characterization of Monduca
Sexta Forewing’, presented at the Dayton-Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March 9, 2010.
267 Sabat, J., and Palazotto, A., “Structural Consideration for the Slotted Waveguide
Assembly Stiffened Structure in Compression”, presented at the Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March 9, 2010.
268 Sims, T., and Palazotto, A., “ A Structural Dynamic Analysis of a Manduca Sexta
Forewing”, presented at the Dayton-Cincinnati Aerospace Science Symposium,
Dayton, Ohio, March 9,2010.
269 Tubbs, T., and Palazotto,A., “Flapping Motion of Manduca Sexta”, presented at
the Dayton-Cincinnati Aerospace Science Symposium, Dayton, Ohio, March
9,2010.
270 Meador, S., and Palazotto,A., “ Consideration of Wear at High Velocities”,
presented at the Dayton-Cincinnati Aerospace Science Symposium, Dayton,
Ohio, March 9,2010.
271 Pai, F. and Palazotto, A., “Advanced time Frequency Analysis for
Characterization of Nonlinear Structural Vibrations”, presented at the 51st AIAA
SDM Conference, Orlando, Florida, April, 12-15, 2010, paper # 2010- 2639.
272 Norris, A., Palazotto, A., and Cobb, R., “ Structural Dynamic Characterization of
an Insect Wing”, presented at the 51st AIAA SDM Conference, Orlando, Florida,
April, 12-15, 2010, paper # 2010- 2790
273 . Sabat, J., and Palazotto, A., “Structural Performance of Composite Material for a
Slotted Waveguide Antenna”, presented at the 51st AIAA SDM Conference,
Orlando, Florida, April, 12-15, 2010, paper # 2010-2945.
274 Abu Al-Rub, R., Palazotto, A., “Mesoscale Energy Dissipation Prediction in
Thermal Barrier Ceramic Coatings under Nonlinear Vibration”, presented at the
51st AIAA SDM Conference, Orlando, Florida, April, 12-15, 2010, paper # 2010-
3125.
275 Easterday, O., Palazotto,A., Branam, R., and Baker., “ An Unique Experimental
Device for Evaluating Damping Properties of Thermal Barrier Coatings at
Elevated Temperatures, presented at the 51st AIAA SDM Conference, Orlando,
Florida, April, 12-15, 2010, paper # 2010-3126.
276 Abu Al Rub and Palazotto, A., “ Nonlocal Gradient- Dependent Constitutive
Model for Simulating Localized Damage and Fracture”, Presented at the Society
of Engineering Science Symposium, October, 3-6, 2010, at Iowa State University,
Iowa
277 Tubbs, T., Palazotto, A., and Willis, M., “Bio-Inspired Research for
Manufacturing Purposes”, Presented at the 25th Technical Conference of the
American Society of Composites”, Paper number 1214, Dayton, Oh. September
20-22, 2010.
278 Deleon, N., O’Hara, R., and Palazotto, A., Manufacturing of Engineering
Biologically Inspired Flapping Wings”, Presented at the 25th Technical
Conference of the American Society of Composites”, Paper number 1215,
Dayton, Oh., September 20-22,2010
279 Tubbs, T., Palazotto, A. , and Willis, M., “Flight Muscle Movement to Advance
Bio-inspired Micro Air Vehicles”, Presented at the 6th Annual Engineering
Science Symposium, October, 18, 2010, at WSU, Ohio.
280 Deleon, N., O’Hara, R., Palazotto, A., “Evaluation of Manufacturing Techniques
of Flapping MAV Wings”, Presented at the 6th Annual Engineering Science
Symposium, October, 18, 2010, at WSU, Ohio.
281 Easterday, O., Palazotto, A., Branam, R., and Baker, W., “ Characterization of
Bulk Mechanical Complex Modulus of a Thermal Barrier Coating at Various
Temperatures Using a Free-Free Beam Apparatus”, Presented at the 6th Annual
Engineering Science Symposium, October, 18, 2010, at WSU, Ohio
282 . Palazotto, A., “Research on the Effects of Severe Wear”, to AFOSR,
Washington, D.C., February,8, 2011
283 Palazotto, A., and Meador, S., “ Numerical Study of High Velocity Wear ,
presented at the AIAA Dayton-Cincinnati Aerospace Science Symposium,
Dayton, Ohio, March, 1,2011
284 .O’Hara, R.,and Palazotto, A.,” Optimal Determination of the Elastic Modulus of
Vein in a MAV”, presented at the AIAA Dayton-Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 1,2011.
285 Paek, G., Baker, W. , and Palazotto, A., “Partitioning of Heat Generation by
Friction Between Two Surfaces”, presented at the AIAA Dayton-Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 1,2011
286 DeLeon, N., O’Hara, R., and Palazotto, A., “Manufacturing and Evaluation of a
Biologically Inspired Engineering MAV Wing Compared to the Manducca Sexta
Wing under Simulation of Flapping Conditions”, presented at the AIAA Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March, 1, 2011.
287 Tubbs,T.,Palazotto, A., and Willis, M., “ Simulating Flapping Motion of the
Manduca Sexta Using Electromyography”, presented at the AIAA Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March, 1,2011
288 Easterday, O., Palazotto, A.,Branam,R.,and, Baker, W., “Experimental
Characterization of Damping Properties of Coatings at Elevated Temperatures”
presented at the 52nd AIAA SDM Conference ,Denver,CO.,April, 4-7, 2011, paper
# AIAA 2011-1943
289 . O’Hara, R.,and Palazotto,A.,”Structural Identification and Simulation of the
Manduca Sexta”, presented at the 52nd AIAA SDM Conference
,Denver,CO.,April, 4-7, 2011, paper # AIAA 2011-2066..
290 Palazotto, A., and Meador, S., “Consideration of Wear at High Velocities Using a
Hydrocode”, presented at the 52nd AIAA SDM Conference, Denver, CO., April,
4-7, 2011, paper # AIAA 2011-2120.
291 Abu Al-Rub, R.,and Palazotto, A., “Nonlocal Constitutive Model for Simulating
Localized Damage and Fracture Viscoplastic Solids Under Energy Impact”,
presented at the 52nd AIAA SDM Conference ,Denver,CO.,April, 4-7, 2011, paper
# AIAA 2011-2175
292 .\ Szelag, T. and Palazotto, A.,” Effects of Inaccuracies in Small
Nonhomogeneous Fiber Specimens”, presented at the 7th Annual Dayton
Engineering Science Symposium, ASME, Wright State University, Dayton, Ohio,
October, 26,2011
293 Hollenbeck, A., and Palazotto, A., Evaluation of the Hawkmoth Thorax for
Flapping Wing Micro Air Vehicles” presented at the 7th Annual Dayton
Engineering Science Symposium, ASME, Wright State University, Dayton, Ohio,
October, 26,2011
294 Murray, J., and Palazotto, A., “ The Use of Photogrammetry to Evaluate
Dynamics Characteristics of a Manduca Sexta Wing” presented at the 7th Annual
Dayton Engineering Science Symposium, ASME, Wright State University,
Dayton, Ohio, October, 26,2011
295 .Almodovar, G., and Palazotto, A., “Characterization of Composite Materials for
Application in Antenna Waveguide Design In Remotely Piloted Aircraft
Structures”, presented at the 7th Annual Dayton Engineering Science Symposium,
ASME, Wright State University, Dayton, Ohio, October, 26,2011
296 Palazotto, A., and Meador, S., “Consideration of Wear at High Velocities Using a
Hydrocode”, presented at the 52nd AIAA SDM Conference, Denver, CO., April,
4-7, 2011, paper # AIAA 2011-2120.
297 Palazotto, A., and McCormick, H., “Report on Phase II Progress in High Velocity
Wear”, January 8, 2012
298 .Buentello, R., Palazotto, A., and Baker, W., “ The Evaluation of Material Failure
Due to High Speed Sliding”, presented at the 37th Annual Dayton- Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 6, 2012
299 Dauby, B., and Palazotto, A., “ The Evaluation of Muscle Reaction of a Manduca
Sexta Due to Electronic Impulse”, presented at the 37th Annual Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March, 6, 2012
300 .Cox, J., and Palazotto, A., “Mistuning Considerations in a Rotating Disk” ”,
presented at the 37th Annual Dayton- Cincinnati Aerospace Science Symposium,
Dayton, Ohio, March, 6, 2012.
301 Szelag, T., and Palazotto, A., “Composite Material Inaccuracies Considering a
Composite MAV Wing” ”, presented at the 37th Annual Dayton- Cincinnati
Aerospace Science Symposium, Dayton, Ohio, March, 6, 2012
302 .Lee, K., and Palazotto, A., “A Study of the Thermal Environment Developed by
a Traveling Sleigh at High Velocities” ”, presented at the 37th Annual Dayton-
Cincinnati Aerospace Science Symposium, Dayton, Ohio, March, 6, 2012.
303 Almodovar, G., and Palazotto, A., Characterization of Composite Materials in the
X- Band Radio Frequency Range for Application in Antenna and Waveguide
Design” ”, presented at the 37th Annual Dayton- Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 6, 2012.
304 Metlen, T., and Palazotto, A., “Design Challenges of Lighter Than Air Vehicles”
”, presented at the 37th Annual Dayton- Cincinnati Aerospace Science
Symposium, Dayton, Ohio, March, 6, 2012.
305 Hollenbeck, A., and Palazotto, A., “Mechanics of the Hawkmoth Thorax Material
Properties and Power Calculations for Micro Air Vehicle Research.”, presented at
the 37th Annual Dayton- Cincinnati Aerospace Science Symposium, Dayton,
Ohio, March, 6, 2012.
306 DeMarci, L., Palazotto, A., Hollenbeck, A., and Cavallaro, R., “Exploring
Structural Investigation of a Hawkmoth Inspired MAV Thorax”, AIAA, paper,
presented at the AIAA SDM Conference, Honolulu, Hawaii, April, 8,2012
307 McCormick, H., and Palazotto, A., “Report on the Progress of Phase II High
Velocity Wear”, Presented at Eglin, AFB,April, 16, 2012
308 Palazotto, A., and Huber, D., “Evaluation of Wear under High Velocities”,
Presented at the ASCE Engineering Mechanics Institute Conference, 2012, Notre
Dame University, June, 18-20, paper No. 410.
309 Hollenbeck, A., and Palazotto, A., “Evaluation of the Thorax of a Manduca Sexta
for Flapping Wing Micro Air Vehicle Applications, Presented at the ASCE
Engineering Mechanics Institute Conference, 2012, Notre Dame University, June,
18-20, paper No. 556
310 Hernandez, B. ,and Palazotto,A, ., “Three Dimensional Finite Element Modeling
of High Speed Sliding Wear”AIAA 2013- 1505, presented at the AIAA SDM
conference, April 7-11, 2013, Boston, Mass.(presented by Carl Parsons Ctr)
311 Metlen, T. ,and Palazotto,A., “ Design of a Structure That Achieves Positive
Buoyancy in Air Using a Vacuum”, AIAA 2013-1881, , presented at the AIAA
SDM conference, April 7-11, 2013, Boston, Mass.(presented by Carl Parsons Ctr)
312 Parson, C., Chrissis, J., O’Hara, R., and Palazotto, A., Direct Search
Optimization of a Flapping Micro Air Vehicle Wing”, AIAA 2013-1679,,
presented at the AIAA SDM conference, April 7-11, 2013, Boston, Mass
313 Cranston, B., and Palazotto, A., “Evaluation of the Thorax of the Manduca Sexta
for Flapping Wing Micro Air Vehicle Application”, Presented at the WSU, DESS
2012 conference, October, 24, 2012
314 Wuertemberger, L.,and Palazotto,A.,”Predicting Wear of a high Speed Rocket
Sled”, Presented at the WSU, DESS 2012 conference , October,24,2012
315 Hernandez, B.,and Palazotto,A., “Three Dimensional Finite Element Modeling of
High Speed Sliding Wear”,, Presented at the WSU, DESS 2012 conference ,
October,24,2012
316 Metlen, T.,and Palazotto,A.,”Vacuum Lighter Than Air Vehicle”, Presented at
the WSU, DESS 2012 conference , October,24,2012
317 Cox, G.,and Palazotto, A., “Validation Processes for Mistuned Rotors”, Presented
at the WSU, DESS 2012 conference , October,24,2012
318 Dauby, B., and Palazotto, A., “Finite Element Analysis of Nanoindintation of
Manduca Sexta Flight Muscles”, Presented at the WSU, DESS 2012 conference,
October, 24, 2012
319 Deleon, Armando, and Palazotto,A.,”Column Buckling Prediction Using Finite
Elements”, Presented at the WSU, DESS 2012 conference , October,24,2012
320 Metlen, T.,and Palazotto,A.,”Design of a Lighter Than Air Vehicle that Achieves
Positive buoyancy Using a Vacuum”, Presented at the AIAA 38th Dayton-
Cincinnati Aerospace Science Symposium, March, 6, 2013, Dayton, Ohio.
(Student received outstanding paper award).
321 Deleon, A., and Palazotto, A., “Shock Wave Propagation in a Bar”, Presented at
the AIAA 38th Dayton-Cincinnati Aerospace Science Symposium, March, 6,
2013, Dayton, Ohio
322 Wuertemberger, L., and Palazotto, A.,”Predictiong Wear of the Holloman Test
Track Sleigh”, Presented at the AIAA 38th Dayton-Cincinnati Aerospace Science
Symposium, March, 6, 2013, Dayton, Ohio
323 Le, K., Palazotto,A.,’and Baker, W., “The Evaluation of Melt Wear Due to High
Speed of a Traveling Sled”, Presented at the AIAA 38th Dayton-Cincinnati
Aerospace Science Symposium, March, 6, 2013, Dayton, Ohio
324 Hernandez, B., and Palazotto, A., “Three Dimensional Evaluation of High
Velocity Asperity Impact”, Presented at the AIAA 38th Dayton-Cincinnati
Aerospace Science Symposium, March, 6, 2013, Dayton, Ohio
325 Engelbreton, C., and Palazotto, A.,” Using Hysteretic Energy to Evaluate
Damping Properties of Hard Coatings on Titanium”, Presented at the AIAA 38th
Dayton-Cincinnati Aerospace Science Symposium, March, 6, 2013, Dayton, Ohio
326 Cranston , Brian, and Palazotto, A., Evaluation of the Thorax of the Manduca
Sexta for Flapping Wing Air Vehicle”, (Award Winner), presented at the WSU,
ASME, DESS, 2013, Conference, October, 29, 2013
327 Alban, C., Palazotto,A.,Baker, W., and Rutlecge,J., “”Thermal and Melt Wear
Characterization of Materials in Sliding Contact at High Speeds”, presented at the
WSU, ASME, DESS, 2013, Conference, October, 29, 2013
328 Cavallaro , G., Palazotto, A., Baker, W., “Comparison of Medium and High
Speed Wear Rates Using Abaqus”, presented at the WSU, ASME, DESS, 2013,
Conference, October, 29, 2013
329 Deleon , A., and Palazotto, A., “Finite Element Modeling of Stress Wave
Propagation”, presented at the WSU, ASME, DESS, 2013, Conference, October,
29, 2013
330 Adomo-Rodriquez , R. and Palazotto, A., “The Analysis of a Lighter Than Air
Vehicle within a Vacuum”, presented at the WSU, ASME, DESS, 2013,
Conference, October, 29, 2013
331 Cox , G., Palazotto, A., Brown, J., and George, T., “Experimental Uncertainty
Qualification and its Cumulative Effects on the Identification of Geometric
Mistuning In Cyclic Structures”, presented at the WSU, ASME, DESS, 2013,
Conference, October, 29, 2013
332 Wuertemberger ,L., and Palazotto, A., “Predicting Wear of a High Speed Rocket
Sled Using a HydoCode (CTH)”, presented at the WSU, ASME, DESS, 2013,
Conference, October, 29, 2013
333 Alban ,C.,Palazotto,A.,Baker,W.,and Rutledge,J., “High Speed Effects on
Thermal Wear”, presented at the AIAA 39th Dayton-Cincinnati, Aerospace
Science Symposium, March,5, 2014. Dayton, Ohio.
334 Cavallaro, G., Palazotto, A., and Baker, W., “The Use of Abaqus in Evaluating
Medium Velocity Wear”, presented at the AIAA 39th Dayton-Cincinnati,
Aerospace Science Symposium, March, 5, 2014. Dayton, Ohio.
335 Cranston, B., and Palazotto, A., “Evaluation of a Flapping MAV Wing”,
presented at the AIAA 39th Dayton-Cincinnati, Aerospace Science Symposium,
March, 5, 2014. Dayton, Ohio.
336 Deleon, A., and Palazotto, A., “Wave Propagation in a 3D Beam”, presented at
the AIAA 39th Dayton-Cincinnati, Aerospace Science Symposium, March, 5,
2014. Dayton, Ohio.
337 Adomo-Rodriquez, R., and Palazotto, A., “Analysis of a LTA Vehicle”, presented
at the AIAA 39th Dayton-Cincinnati, Aerospace Science Symposium, March, 5,
2014. Dayton, Ohio
338 Cox ,G., Palazotto, A., Brown, J., George, T., “Experimental Evaluation of
Mistuning”, presented at the AIAA 39th Dayton-Cincinnati, Aerospace Science
Symposium, March,5, 2014. Dayton, Ohio.
339 Wuertemberger, L., and Palazotto, A., “The Use of a HydoCode in Evaluating
Wear at High Velocities” presented at the AIAA 39th Dayton-Cincinnati,
Aerospace Science Symposium, March, 5, 2014. Dayton, Ohio.
340 Cranston , Brian, and Palazotto, A., “ Evaluating Unique Lighter Than Air
Vehicles with an Internal Vacuum”, presented at the WSU, ASME, DESS, 2014,
Conference, October, 28, 2014
341 Just, L., Palazotto, A., and Deluca, A., “Dynamic Response Analysis of an
Icosahedron Frame Lighter than Air Vehicle”, presented at the WSU, ASME,
DESS, 2014, Conference, October, 28, 2014.
342 Adomo -Rodriquez, R., and Palazotto, A., “UAV- LTAV One Foot In Diameter”,
presented at the WSU, ASME, DESS, 2014, Conference, October, 28, 2014
343 Deleon, A.,and,Palazotto, A., “Stress Waves in a Beam Under Dynamic
Loading”, presented at the WSU, ASME, DESS, 2014, Conference, October, 28,
2014.
344 Hodkin, R., Palazotto, A., and Deluca, A., “Response Characteristics of a
Simplified Piezoelectric Shaker Table Mechanical Model Using Classical
Vibration Theory”, presented at the WSU, ASME, DESS, 2014, Conference,
October, 28, 2014.
345 Cox, G., Palazotto, A., Brown, J., and George, T., “Recreating a Forced Boundary
Condition Using Physical Supports”, presented at the WSU, ASME, DESS, 2014,
Conference, October, 28, 2014.
346 Wuertemberger, L., and Palazotto, A., “A Study of the Johnson- Cook Strength
and Damage Model”, presented at the WSU, ASME, DESS, 2014, Conference,
October, 28, 2014.
347 Alghofaily, M., and Palazotto, A,” Analysis of 3 D Frame in the Form of a
sphere”, presented at the AIAA 40th Dayton-Cincinnati, Aerospace Science
Symposium, March,4, 2015. Dayton, Ohio.
348 Cranston, B., and Palazotto, A., “Evaluation of Unique Lighter than Air
Vehicles”, presented at the AIAA 40th Dayton-Cincinnati, Aerospace Science
Symposium, March, 4, 2015. Dayton, Ohio.
349 Deleon, A., and Palazotto, A., “Elastic Wave Action under Dynamic Loading”,
presented at the AIAA 40th Dayton-Cincinnati, Aerospace Science Symposium,
March, 4, 2015. Dayton, Ohio.
350 Hodkin, R., and Palazotto, A., “Model Characteristics of a Piezoelectric Shaker
Table”, presented at the AIAA 40th Dayton-Cincinnati, Aerospace Science
Symposium, March, 4, 2015. Dayton, Ohio.
351 Just, L., and Palazotto, A., ‘ Nonlinear Dynamic Response Analysis of an
Icosahedron Frame”, presented at the AIAA 40th Dayton-Cincinnati, Aerospace
Science Symposium, March,4, 2015. Dayton, Ohio.
352 Wuertemberger, L., and Palazotto, A., “Evaluation of the Viscoplastic Properties
of Treated 4130 Steel of Flow and Failure Based on the Johnson-Cook Damage
and Flow Model” presented at the AIAA 40th Dayton-Cincinnati, Aerospace
Science Symposium, March, 4, 2015. Dayton, Ohio.
353 Adorno- Rodriquez, R., and Palazotto, A., “Nonlinear Structural Analysis of an
Icosahedron under an Internal Vacuum”, presented at the SCITECH 2015
conference, January, 5-9, Kissimmee, Fl.
354 Just, L., and Palazotto, A., Evaluation of an Icosahedron Eigenvalue”, presented
at the 57th AIAA/ASCE/AHS/ASC SciTech 2016, San Diego, Ca., January, 4-8,
2016,paper # AIAA 2016-0202.
355 Cranston, B., and Palazotto, A., Design of Unique Structures Under an Internal
Vacuum”, presented at the 57th AIAA/ASCE/AHS/ASC SciTech 2016, San
Diego, Ca., January, 4-8, 2016,paper # AIAA 2016-0487.
356 Knapp, K., Palazotto, A., and Scott-Emuakpor, O., “Goodman Data Improved”,
presented at the 57th AIAA/ASCE/AHS/ASC SciTech 2016, San Diego, Ca.,
January, 4-8, 2016,paper # AIAA 2016-0925.
357 Graves, W., Liu, D., and Palazotto, A., “ Topology Evaluation of a Warhead”,
presented at the 57th AIAA/ASCE/AHS/ASC SciTech 2016, San Diego, Ca.,
January, 4-8, 2016,paper # AIAA 2016-1509.
358 Dempsey, A., Liu, D., Palazotto, A., and Abraham, E.,“ Dynamic Properties of
Added Manufactured 15-5 PH Stainless Steel and 3D Micromechanics”,
presented at the 57th AIAA/ASCE/AHS/ASC SciTech 2016, San Diego, Ca.,
January, 4-8, 2016,paper # AIAA 2016-1510.
359 Hanks, E., Liu, D., and Palazotto, A., “ Surface Roughness Effects on Ultra
Testing of Additive Manufactured “,presented at the 57th AIAA/ASCE/AHS/ASC
SciTech 2016, San Diego, Ca., January, 4-8, 2016,paper # AIAA 2016-1512.
360 Palazotto, A., and AlGhofaily, M. “Analysis of a 3D Frame of an Icosahedron”,
presented at the 11th Annual Dayton Engineering Sciences Symposium, WSU,
November, 2, 2015.
361 Cranston*#, B., and Palazotto, A., “Design and Structural Analysis of Unique
Structures”, presented at the 11th Annual Dayton Engineering Sciences
Symposium, WSU, November, 2, 2015.
362 Knapp, K., Palazotto, A., Scoot-Emualpor, O., and George, T., “Improved Pre-
Strain Method for Generating Goodman Data with Vibration Based Fatigue
Testing”, presented at the 11th Annual Dayton Engineering Sciences Symposium,
WSU, November, 2, 2015.
363 Deleon, A., and Palazotto, A., “Description of the Penalty Method Utilized by
Abaqus When Contact Occurs”, presented at the 11th Annual Dayton Engineering
Sciences Symposium, WSU, November, 2, 2015.
364 Dempsey, A., Liu, D., Palazotto, A., and Abrahams, R., “Properties of 15-5
Additive manufactured Stainless Steel”, presented at the 11th Annual Dayton
Engineering Sciences Symposium, WSU, November, 2, 2015.
365 Graves, W., Liu, D., and Palazotto, A., “Topology Optimization of a Penetrating
Warhead”, presented at the 11th Annual Dayton Engineering Sciences
Symposium, WSU, November, 2, 2015.
366 Wuertemberger, L., and Palazotto, A., “Evaluation of Flow and Failure Properties
of Treated 4130 Steel”, presented at the 11th Annual Dayton Engineering Sciences
Symposium, WSU, November, 2, 2015.
367 Hanks, E., Liu, D., and Palazotto, A., “Effects of Surface Roughness of Electron
Beam Melting ti-6Al-4v on Ultrasonic Testing”, presented at the 11th Annual
Dayton Engineering Sciences Symposium, WSU, November, 2, 2015.
368 Wuertemberger, L., and Palazotto, A., “Microstructural Investigation of
Dynamically Failed Heat Treated 4130 Steel”, Presented at the 41st Annual
Dayton-Cincinnati Aerospace Science Symposium, Sinclair CC, Dayton, Ohio,
March, 2, 2016.
369 Mirmasoudi, S., and Palazotto, A., “High Temperature Transient Creep Analysis
of Metals”, Presented at the 41st Annual Dayton-Cincinnati Aerospace Science
Symposium, Sinclair CC, Dayton, Ohio, March, 2, 2016.
370 Hanks, E., Liu, D., and Palazotto, A., “Effect of Surface Roughness of Electron
Beam Melting Ti-6Al-4v on Ultrasonic Testing”, Presented at the 41st Annual
Dayton-Cincinnati Aerospace Science Symposium, Sinclair CC, Dayton, Ohio,
March, 2, 2016.
371 Graves, W., Liu, D., and Palazotto, A., “A Warhead Design Using Optimization”,
Presented at the 41st Annual Dayton-Cincinnati Aerospace Science Symposium,
Sinclair CC, Dayton, Ohio, March, 2, 2016.
372 Dempsey, A., Liu, D., and Palazotto, A. “Effects of the Additive Manufacturing
Methods on the Dynamic Properties of Stainless Steel”, Presented at the 41st
Annual Dayton-Cincinnati Aerospace Science Symposium, Sinclair CC, Dayton,
Ohio, March, 2, 2016.
373 Gockel, J., and Palazotto, A., “The Effect of Anisotropy in the Constitutive
Relationship of Additive Manufactured 15-5 PH Subjected to High Strain Rates”,
12th Annual ASME Dayton Engineering Science Symposium, WSU, November,
1, 2016.
374 Lum, E., and Palazotto, A., “Analysis of the Effects of Additive Manufacturing on
the Material Properties of Additive Manufactured 15-5 PH Stainless Steel”, 12th
Annual ASME Dayton Engineering Science Symposium, WSU, November, 1,
2016.
375 Schwemmer, J. (#*), Chrissis, J., and Palazotto, A., “Optimal Design of a Hexakis Icosahedron
Vacuum Based Lighter Than Air Vehicle”, 12th Annual ASME Dayton
Engineering Science Symposium, WSU, November, 1, 2016.
376 Snyder, J., and Palazotto, A., “Design and Dynamic Analysis of a Unique
Structure under an Internal Vacuum”, 12th Annual ASME Dayton Engineering
Science Symposium, WSU, November, 1, 2016.
377 Knapp, K., Palazotto, A., and Scott-Emuakpor, O., “In Situ Validation of Residual
Stress Gradients in Plasticity Deformed Vibration Based Fatigue Plates”, 12th
Annual ASME Dayton Engineering Science Symposium, WSU, November, 1,
2016.
378 Eisensmith, D., Palazotto, A., and Langer, K., “Residual Stress Evaluation of
Laser Shock Penning”, 12th Annual ASME Dayton Engineering Science
Symposium, WSU, November, 1, 2016.
379 Provchy, Z., and Palazotto, A., “Topology Optimization of a Warhead”, 12th
Annual ASME Dayton Engineering Science Symposium, WSU, November, 1,
2016.
380 Eisensmith, D., Palazotto, A., and Langer, K., “ Residual Stress Evaluation of
Laser Shock Penning Over a Partial Through the Thickness Crack”, 6th Internal
Conference on Laser Penning and Related Phenomena, South Africa, November,
6-11, 2016.
381 Park, C., Palazotto, A., and Hale, C., “Longitudinal Damage Detection Using
Lamb Waves”, 12th Annual ASME Dayton Engineering Science Symposium,
WSU, November, 1, 2016.
382 Lee, J. (#*), and Palazotto, A., “Study of Chaotic Behavior in the Dynamic
Response of an Airfoil”, 12th Annual ASME Dayton Engineering Science
Symposium, WSU, November, 1, 2016.
383 Song, R., Muliana, A., and Palazotto, A., “Steady State and Transient Creep
Response of High Temperature Alloys” AIAA-2017-1363, 58th
AIAA/ASCE/AHS/ASC SciTech 2017, Dallas, TX. January, 9-13, 2017.
384 Park, C., Palazotto, A., and Hale, C., “Longitudinal Crack Damage Detection
Using Lamb Waves” AIAA-2017-0862, 58th AIAA/ASCE/AHS/ASC SciTech
2017, Dallas, TX. January, 9-13, 2017.
385 Knapp, K., Palazotto, A., and Scott-Emuakpor, O., “Comparison of Finite
Element Strain Distribution to in Situ Strain Field of a Plastically Deformed Plate,
AIAA 2017-1139,(Lockheed-Martin Best Student Paper Award), 58th
AIAA/ASCE/AHS/ASC SciTech 2017, Dallas, TX. January, 9-13, 2017.
386 Lum, E., Palazotto, A., and Dempsey, A. (*), “Analysis of the Effects of Additive
Manufacturing on the Material Properties of 15-5 PH Stainless Steel”, AIAA
2017-1142, 58th AIAA/ASCE/AHS/ASC SciTech 2017, Dallas, TX. January, 9-
13, 2017.
387 Provchy, Z., and Palazotto, A., “Additively Manufactured Penetrators”, AIAA
2017-1143, 58th AIAA/ASCE/AHS/ASC SciTech 2017, Dallas, TX. January, 9-
13, 2017.
388 Snyder, J., and Palazotto, A., “Design and Modal Analysis of Unique Structure
under an Internal Vacuum”, AIAA 2017-1596, 58th AIAA/ASCE/AHS/ASC
SciTech 2017, Dallas, TX. January, 9-13, 2017.
389 Palazotto, A., and Hopkins, R., “Model Characteristics of a Piezoelectric Shaker
Table”, AIAA 2017- 1597, 58th AIAA/ASCE/AHS/ASC SciTech 2017, Dallas,
TX. January, 9-13, 2017.
390 Provchy, Z., and Palazotto, A., “Optimization of a Perforator Made from Additive
Manufactured Material”, 42nd Annual Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, March, 1, 2017.
391 Lee,J., and Palazotto, A., “ Evaluating the Inclusion of an Optimized and
Deformable Internal Structure on an Airfoil’s Aerodynamic Response”, 42nd
Annual Dayton-Cincinnati Aerospace Science Symposium, Sinclair Conference
Center, March, 1, 2017.
392 Schwemmer, J., Chrissis, J., and Palazotto, A., “Optimal Design of a Lighter Than
Air Vehicle”, 42nd Annual Dayton-Cincinnati Aerospace Science Symposium,
Sinclair Conference Center, March, 1, 2017.
393 Snyder, J., and Palazotto, A., “A Study of Quasi-Static and Dynamic Analysis of
a Hexakis Icosahedron “, 42nd Annual Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, March, 1, 2017.
394 Hale, C., Park, C., and Palazotto, A., “Longitudinal Damage Detection in a Beam
Using Lamb Waves”, 42nd Annual Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, March, 1, 2017.
395 Knapp, K., Palazotto, A., Scott-Emuakpor, O., “Time Dependent Validation of
Strain Distribution of a Plastically Deformed Plate”, 42nd Annual Dayton-
Cincinnati Aerospace Science Symposium, Sinclair Conference Center, March, 1,
2017.
396 Lum, E., and Palazotto, A., “Analysis of the Effects of A.M. On Material
Properties”, 42nd Annual Dayton-Cincinnati Aerospace Science Symposium,
Sinclair Conference Center, March, 1, 2017.
397 Eisensmith, D., Palazotto, A., Langer, K., “Fatigue Effects of Laser Shock
Penning”, 42nd Annual Dayton-Cincinnati Aerospace Science Symposium,
Sinclair Conference Center, March, 1, 2017.
398 Palazotto, A., and Hodkin, R., “The Evaluation of a ROM for a Piezoelectric
Shaker Table”, 42nd Annual Dayton-Cincinnati Aerospace Science Symposium,
Sinclair Conference Center, March, 1, 2017.
399 Palazotto, A., and AlGhofaily, M., “Design of an Icosahedron Frame”,
Engineering Mechanic Institute Conference, San Diego, CA. June 4-7, 2017.
400 Song, R., Muliana, A., and Palazotto, A., “The Effect of Energy Dissipation on
the Creep and Cyclic Response of NARLOY-Z”, presented at the Intl. Mechanical
Engineering Congress & Exposition, Tampa, Fl., November, 3-7, 2017.
401 Hoffman, J., Palazotto, A., Niedbalski, N., “Linear Modeling of an
Electromechanical Actuator Test Rig”, Presented at the 10th Annual ASME
Dayton Engineering Science Symposium, WSU, October, 2017.
402 Castello, A., and Palazotto, A., “In Depth Structural Analysis of the Hexakis
Lighter than Air Vehicle”, Presented at the 10th Annual ASME Dayton
Engineering Science Symposium, WSU, October, 2017.
403 Adorno, R., and Palazotto, A., “Potential of Lighter than Air Vehicles under a
Vacuum”, Presented at the 10th Annual ASME Dayton Engineering Science
Symposium, WSU, October, 2017.
404 Patel, A., and Palazotto, A., “Investigation of Multi-material Projectile Impact”,
Presented at the 10th Annual ASME Dayton Engineering Science Symposium,
WSU, October, 2017.
405 Liu, B., Palazotto, A., and Doehn, G.,”Impact Welding of Dissimilar Material
Combinations of an Additive Manufactured Material”, Presented at the 10th
Annual ASME Dayton Engineering Science Symposium, WSU, October, 2017.
406 Engebretsen, C., Palazotto, A., and Langer, K., “Laser Shock Penning for Aircraft
Life Extension”, Presented at the 10th Annual ASME Dayton Engineering Science
Symposium, WSU, October, 2017.
407 Moore, K., and Palazotto, A., “Nonlinear Static Analysis of a Celestial
Icosahedron Vacuum Lighter than Air Vehicle”, Presented at the 10th Annual
ASME Dayton Engineering Science Symposium, WSU, October, 2017.
408 Deleon, A., Baker, W., and Palazotto, A., “Tracking a Nonlinear Melt Region
Produced During a High Velocity Event”, Presented at the 10th Annual ASME
Dayton Engineering Science Symposium, WSU, October, 2017.
409 Desroches, J., Palazotto, A., and Won, H., “Suppression of Vertex Induced
Vibration”, Presented at the 10th Annual ASME Dayton Engineering Science
Symposium, WSU, October, 2017.
410 Deleon, A., Baker, W., and Palazotto, A., “Evaluation of a Nonlinear Melt
Region”, presented at AIAA SciTech 2018, Kissimmee, Fl., paper # AIAA-2018-
0187, January,8-12,2018.
411 Engebretsen, C., Palazotto, A., and Langer, K., “Finite Element Model
Correlation of Laser Shock Penning”, presented at AIAA SciTech 2018,
Kissimmee, Fl., paper # AIAA-2018-0234, January, 8-12, 2018.
412 Patel, A., and Palazotto, A., “Investigation of Hybrid Material Projectile Impact
Against Concrete Targets”, presented at AIAA SciTech 2018, Kissimmee, Fl.,
paper # AIAA-2018-0236, January,8-12,2018.
413 Liu, B., Palazotto, A., and Doehn, G., “Impact Welding of Wrought and
Additively Manufactured 15-5 PH Stainless Steel”, presented at AIAA SciTech
2018, Kissimmee, Fl., paper # AIAA-2018-0488, January, 8-12, 2018.
414 Schwemmer, J., Palazotto, A., and Chrissis, J., “Optimal Design of a Hexakis
Icosahedron Vacuum Based Lighter than Air Vehicle”, presented at AIAA
SciTech 2018, Kissimmee, Fl., paper # AIAA-2018-0187, January, 8-12, 2018.
415 Castello, A., and Palazotto, A., “Structural Analysis and Optimization of the
Hexakis Lighter than Air Vehicle”, ”, presented at AIAA SciTech 2018,
Kissimmee, Fl., paper # AIAA-2018-01994, January, 8-12, 2018.
416 Hoffman, J., Palazotto, A., and Niedbalski, N.,”Linear Analysis of a
Electromechanical Actuator”, ”, presented at AIAA SciTech 2018, Kissimmee,
Fl., paper # AIAA-2018-2158, January, 8-12, 2018.
417 Adorno, R., and Palazotto, A., “Progress of Lighter than Air Vehicles with an
Internal Vacuum”, presented at the 43rd Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, Dayton, Oh., February, 27, 2018.
418 Hoffman, J., Palazotto, A., and Niedbalski, N., “Analysis of an Electromechanical
Actuator Rig”, presented at the 43rd Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, Dayton, Oh. February, 27, 2018.
419 Moore, K., and Palazotto, A., “Static Nonlinear Analysis of a Complex
Structure”, presented at the 43rd Dayton-Cincinnati Aerospace Science
Symposium, Sinclair Conference Center, Dayton, Oh. February, 27, 2018.
420 Liu, B., Palazotto, A., and Doehn, G., “Impact Welding for Rapped Repair of
Heat Treated Components”, presented at the 43rd Dayton-Cincinnati Aerospace
Science Symposium, Sinclair Conference Center, Dayton, Oh. February, 27,
2018.
421 Castello, A., and Palazotto, A., “Hexakis Icosahedron Vacuum Lighter than Air
Vehicle Structural Analysis of the Air Evacuation System”, presented at the 43rd
Dayton-Cincinnati Aerospace Science Symposium, Sinclair Conference Center,
Dayton, Oh. February, 27, 2018.
422 Brewer, J., Palazotto, A., and Falugi, M., “Bearing Strength Optimization and
Characterization of a Hybrid Composite Structure”, presented at the 43rd Dayton-
Cincinnati Aerospace Science Symposium, Sinclair Conference Center, Dayton,
Oh. February, 27, 2018.
423 Deleon, A., Palazotto, A., and Baker, W., “Investigating the Nonlinear Melt
Region Produced within a High Speed Environment”, presented at the 43rd
Dayton-Cincinnati Aerospace Science Symposium, Sinclair Conference Center,
Dayton, Oh. February, 27, 2018.
424 Desroches, J., Palazotto, A, and Won, H., “Suppression of Vertex Induced
Vibration for a Elliptic Cross-Sections through Thermal Effects”, presented at the
43rd Dayton-Cincinnati Aerospace Science Symposium, Sinclair Conference
Center, Dayton, Oh. February, 27, 2018.
425 Engebretsen, C., Palazotto, A., and Langer, K., “ F. E. modeling of Laser Shot
Pinning Stresses for Fatigue Improvement’, presented at the 43rd Dayton-
Cincinnati Aerospace Science Symposium, Sinclair Conference Center, Dayton,
Oh. February, 27, 2018.
426 Adorno, R, and Palazotto, A., “Instability of Axially Loaded Cylindrical Shells
Induced by Material Nonlinearity”, Presented at the ASCE Engineering Mechanic
Institute Conference, MIT, Boston, Mass, May,29-June, 1, 2018.
427 Liu, B., Palazotto, A., and Zupta, V., “Interfacial Morphology of Impact Welding
Additive Manufactured 25-5 Stainless Steel”, Presented at the ASCE Engineering
Mechanic Institute Conference, MIT, Boston, Mass, May,29-June, 1, 2018.
428 Lee, J., and Palazotto, A., “Evaluation of an Airfoil Considering Flapping Motion
at Flutter Frequency”, Presented at the ASCE Engineering Mechanic Institute
Conference, MIT, Boston, Mass, May,29-June, 1, 2018.
429 Lui, B., and Palazotto, A., “Impact Welding for Rapid Repair of Full-hard
Precipitation Hardened Steel” presented at the Material Science and Technology
Conference, Columbus, Ohio, October, 16, 2018.
430 Newell, D., Palazotto, A., O’Hara, R., and Cobb, G., “Scan Strategy Effects on
SLM In718, and Mitigating These Effects via Post Process Annealing’, presented
at the Material Science and Technology Conference, Columbus, Ohio, October,
17, 2018.
431 Deleon, A., Palazotto, A., “Finite Element Evaluation of Nonlinear Damping
Properties for Thermal Barrier Coatings”, presented at the 14th Dayton
Engineering Science Symposium, WSU, Dayton, Ohio, October, 30, 2018.
432 Adorno, R., and Palazotto, A., “Effects of Material Nonlinearity on the Stability
of Axially Loaded Cylindrical Shells, presented at the 14th Dayton Engineering
Science Symposium, WSU, Dayton, Ohio, October, 30, 2018.
433 Brewer, J., Palazotto, A., and Falugi, M., “Optimization of the Bearing Strength
of a Hybrid Composite”, presented at the 14th Dayton Engineering Science
Symposium, WSU, Dayton, Ohio, October, 30, 2018.
434 Graves, D., and Palazotto, A., “Analysis of a Celestial Icosahedron Vacuum
Lighter than Air Vehicle’. presented at the 14th Dayton Engineering Science
Symposium, WSU, Dayton, Ohio, October, 30, 2018.
435 Jackson, S., Palazotto, A, Pachter, M., and Niedbolski, N., “Simulation Case
Study on Vaper Cycle Control Strategies”, presented at the 14th Dayton
Engineering Science Symposium, WSU, Dayton, Ohio, October, 30, 2018.
436 Engebretsen, C., Palazotto, A., and Langer, K., “Comparing Empirical Residual
Stress Measurements to FE Stress Field”, presented at the 14th Dayton
Engineering Science Symposium, WSU, Dayton, Ohio, October, 30, 2018.
437 Spear, D., and Palazotto, A., “Self-Healing Materials and Their Application to the
United States Air Force”, presented at the 14th Dayton Engineering Science
Symposium, WSU, Dayton, Ohio, October, 30, 2018.
438 Engebretsen, C., Palazotto, A., and Langer, K., “Laser Shock Impulse Modelling
Via Data Matching’, presented at SciTech 2019, San Diego, Ca., paper # 2019-
0505, January, 7-11, 2019.
439 Lee, J., and Palazotto, A., “The Comparison of and Airfoil to Experimental Lco”,
presented at SciTech 2019, San Diego, Ca., paper # 2019- 0513, January, 7-11,
2019.
440 Jackson, S., Palazotto, A., Pachter, M., and Niedbolski, N., “Control of Vapor
Compression Cycles Under Transient Thermal Loading”, presented at SciTech
2019, San Diego, Ca., paper # 2019- 0536, January, 7-11, 2019.
441 Brewer, J., and Palazotto, A., “Optimization of the Bearing Stress of a Hybrid
Composite”, presented at SciTech 2019, San Diego, Ca., paper # 2019- 0779,
January, 7-11, 2019.
442 Graves, D., and Palazotto, A., “Analysis of a Celestial Shell-Like Structure”,
presented at SciTech 2019, San Diego, Ca., paper # 2019- 1272, January, 7-11,
2019.
443 Newell, D., Palazotto, A., O’Hara, R., and Cobb, G., “Improving the
Microstructure of LPBF IN718 Through Supersolvus Solution Treatment”,
presented at 148th Annual Meeting and Exhibition, Metals and Materials Society,
San Antonio, Texas, March 10-14, 2019.
444 Palazotto, A., Graves, D., Wolff, M., and Moore, K., “Evaluation of a Celestial
Icosahedron Structure Constructed using Additive Manufacturing”, presented at
16th Pan American Congress of Applied Mechanics at University of Michigan,
Ann Arbor, Michigan, May, 20-24,2019.
445 Adorno, R., and Palazotto, A., “Optimization of Spherical Geometry for a
Vacuum Lighter than Air Application”, presented at 16th Pan American Congress
of Applied Mechanics at University of Michigan, Ann Arbor, Michigan, May, 20-
24, 2019.
446 Adorno, R., and Palazotto, A., “Effect of Thickness on the Equilibrium Path of an
Axially Loaded Cylindrical Shells”, presented at the ASCE Engineering
Mechanics Institute Conference, California Institute of Technology, Pasadena,
California, June, 18-21, 2019.
447 Boardman, B., Baker, W., and Palazotto, A., “Modeling Nonlinear Heat Transfer
for a Pin-on-Disc Sliding System”, presented at the Dayton Engineering and
Science Symposium, ASME, University of Dayton, Ohio, October, 29,2019.
448 Shaw, E., Baker, W., and Palazotto, A., “Identifying a Heat Transfer Ratio for
Steady State High-Speed Sliding Contact”, presented at the Dayton Engineering
and Science Symposium, ASME, University of Dayton, Ohio, October, 29,2019.
449 Newell, D., Palazotto, A., and O’Hara, R., “Role of Carbide Coarsening in
Mechanical Properties of Nickel Alloy 718 Manufactured by Laser Beam Powder
Bed Fusion”, presented at the Dayton Engineering and Science Symposium,
ASME, University of Dayton, Ohio, October, 29,2019.
450 Greenoe, K., and Palazotto, A., “Analysis of the Behavior of a 3D Printed
Celestial Icosahedron Structure Under Compressive Loading”, presented at the
Dayton Engineering and Science Symposium, ASME, University of Dayton,
Ohio, October, 29,2019.
451 Adorno, R., and Palazotto, A., “The Helical Sphere-A Near Vacuum Lighter than
Air Envelope”, presented at the Dayton Engineering and Science Symposium,
ASME, University of Dayton, Ohio, October, 29,2019.
452 Spear, D., and Palazotto, A., “Mechanical Properties of Additively Manufactured
Periodic Cellular Structures”, presented at the Dayton Engineering and Science
Symposium, ASME, University of Dayton, Ohio, October, 29,2019.
453 Brewer, J., and Palazotto, A., “Progressive Failure in Bolted Hybrid Composite
Joints”, presented at the Dayton Engineering and Science Symposium, ASME,
University of Dayton, Ohio, October, 29,2019.
454 Engebretsen, C., Palazotto, A., and Langer, K., “Optimization-Based Laser Shock
Pressure Impulse Determination”, presented at the Dayton Engineering and
Science Symposium, ASME, University of Dayton, Ohio, October, 29,2019.
455 Deleon, A., and Palazotto, A., “Shock Wave Investigation of High-Speed
Asperity Collision with Finite Element Modeling”, presented at SciTech 2020,
Orlando, Florida, January, 6-11, 2020, paper # AIAA-2020-0316.
456 Adorno, R., and Palazotto, A., “Towards Feasible Near -Vacuum Lighter-than-
Air Envelops via Gossamer Structures”, presented at SciTech 2020, Orlando,
Florida, January, 6-11, 2020, paper # AIAA-2020-0479.
457 Boardman, B., Baker, W., and Palazotto, A., “Modeling Heat Transfer for a Pinon-
Disc Sliding System”, presented at SciTech 2020, Orlando, Florida, January,
6-11, 2020, paper # AIAA-2020-0973.
458 Beard, A., and Palazotto, A., “Composite Material for High-Speed Projectile
Outer Casing”, presented at SciTech 2020, Orlando, Florida, January, 6-11, 2020,
paper # AIAA-2020-0974.
459 Newell, D., Palazotto, A., and O’Hara, SR., “Creep-rupture Performance of a
Recrystallizing Solution Treatment for Inconel 718 Fabricated by Laser Powderbed
Fusion”, presented at SciTech 2020, Orlando, Florida, January, 6-11, 2020,
paper # AIAA-2020-1123.
460 Spear, D., Palazotto, A., and Kemnitz, R., “Survivability and Damage Modeling
of Advanced Materials”, presented at SciTech 2020, Orlando, Florida, January, 6-
11, 2020, paper # AIAA-2020-1217.
461 Brewer, J., Palazotto, A., Feir, J., and Gran, M., “Bearing Response
Characterization in Bolted Hybrid Composite Joints”, presented at SciTech 2020,
Orlando, Florida, January, 6-11, 2020, paper # AIAA-2020-1928.
462 Graves, D., and Palazotto, A., “Analysis of a Celestial Shell-Like Structure”,
presented at SciTech 2019, San Diego, Ca., paper # 2019- 1272, January, 7-11,
2019.
463 Newell, D., Palazotto, A., O’Hara, R., and Cobb, G., “Improving the
Microstructure of LPBF IN718 Through Supersolvus Solution Treatment”,
presented at 148th Annual Meeting and Exhibition, Metals and Materials Society,
San Antonio, Texas, March 10-14, 2019.
464 Palazotto, A., Graves, D., Wolff, M., and Moore, K., “Evaluation of a Celestial
Icosahedron Structure Constructed using Additive Manufacturing”, presented at
16th Pan American Congress of Applied Mechanics at University of Michigan,
Ann Arbor, Michigan, May, 20-24,2019.
465 Adorno, R., and Palazotto, A., “Optimization of Spherical Geometry for a Vacuum
Lighter than Air Application”, presented at 16th Pan American Congress of
Applied Mechanics at University of Michigan, Ann Arbor, Michigan, May, 20-
24, 2019.
466 Adorno, R., and Palazotto, A., “Effect of Thickness on the Equilibrium Path of an
Axially Loaded Cylindrical Shells”, presented at the ASCE Engineering
Mechanics Institute Conference, California Institute of Technology, Pasadena,
California, June, 18-21, 2019.
467 Spear, D., and Palazotto, A., “Computational Modeling for High Strain Rate ”,
presented at the 45th Dayton Cincinnati Aerospace Symposium, Sinclair
Conference Center, Dayton, Ohio, March, 3, 2020.
468 Boardman, B., Baker, W., and Palazotto, A., “Modeling Nonlinear Heat Transfer
for Pin-on- Disc Sliding System, presented at the 45th Dayton Cincinnati
Aerospace Symposium, Sinclair Conference Center, Dayton, Ohio, March, 3,
2020.
469 Brewer, J., Palazotto, A., Flie, J., and Gran, M., “Progressive Failure in Bolted
Hybrid Composite Joints”, presented at the 45th Dayton Cincinnati Aerospace
Symposium, Sinclair Conference Center, Dayton, Ohio, March, 3, 2020.
470 Beard, A., and Palazotto, A., “Alternative Material for a High-Speed Projectile
Outer Casing”, presented at the 45th Dayton Cincinnati Aerospace Symposium,
Sinclair Conference Center, Dayton, Ohio, March, 3, 2020.
471 Greenoe, K., and Palazotto, A., “Instability of Additive Manufactured Rings under
Compression”, presented at the 45th Dayton Cincinnati Aerospace Symposium,
Sinclair Conference Center, Dayton, Ohio, March, 3, 2020.
472 Roberts, C., and Palazotto, A., “Simulation of Hybrid Composites”, presented at
the 45th Dayton Cincinnati Aerospace Symposium, Sinclair Conference Center,
Dayton, Ohio, March, 3, 2020.

Return to the top of the page

Air Force Institute of Technology
2950 Hobson Way
Wright-Patterson Air Force Base, OH 45433-7765
Commercial: 937-255-6565 | DSN: 785-6565